HS7729RKCI02H Renesas Electronics America, HS7729RKCI02H Datasheet - Page 230

• Manufacturer Part Number: HS7729RKCI02H
• Description: ON CHIP DEBUG EMULATOR W/TRACE
• Manufacturer: Renesas Electronics America

Specifications of HS7729RKCI02H

• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

24. Note on Displaying COMMUNICATION TIMEOUT ERROR
25. Note on Downloading Program
26. Note on [Fill Memory] Dialog Box
27. Note on Using Old Version of Windows
28. Support of Double Float Format
29. Note on Continuous Step Execution
30. Note on Using the [Run program] Dialog Box
210
If COMMUNICATION TIMEOUT ERROR is displayed, the emulator cannot communicate
with the chip. Select [Initialize] from the [File] menu to initialize the emulator.
In the [Load Program] dialog box, which is opened when [Load Program…] is selected, the
verify function is invalid. After downloading the program, perform verify in the [Verify S-
Record File with Memory] dialog box, which is opened when [Verify] is selected from the
[Memory] menu.
The start and end addresses can be specified in the [Fill Memory] dialog box. When the start
address value is larger than the end address value, note that the addresses are filled from the
end to start.
In using the old released version of Windows
selected from the [Setup] menu, an application error occurs and the HDI abnormally exits.
This is due to the old version of COMCTL32.DLL in the System directory of the Windows
directory. Download the update program of COMCTL32.DLL from the Microsoft
homepage for installation, or update the version of Windows
In the following memory operations, the double float format is not supported:
When the step is continuously executed by selecting [Step...] from the [Run] menu, do not use
the BREAKPOINT because this will cause the HDI to abnormally operate.
When [Run...] is selected from the [Run] menu to specify the stop address, there is the
following note:
[Fill Memory] dialog box
[Search Memory] dialog box
MEMORY_FILL command
The [Format] specification in the [Copy Memory] dialog box is ignored. Memory is
copied in a byte unit.
Double float display at little endian operation
When the breakpoint that has been set as Disable is specified as the stop address, note that
the breakpoint becomes Enable when the user program stops.
95
95 (such as 4.00.950a), if [Options...] is
95.