ATDH1150VPC- Atmel, ATDH1150VPC- Datasheet - Page 17

• Manufacturer Part Number: ATDH1150VPC-
• Description: SOFTWARE ISP W/3/5V SUPPLY CABLE
• Manufacturer: Atmel
• Series: Logic Doubling®r
• Type: SPLDs, CPLDsr

Specifications of ATDH1150VPC-

• Contents: ISP Software, ISP Cable and User Guide
• Tool Type: Programming Software
• Core Architecture: Multiple
• For Use With/related Products: ATF15xx Family of CPLD
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ATDH1150VPC

Atmel-ISP Software
3.1.3
3-6
Description of
ATMISP Edit Menu
Commands
Add Device
Edit Device
Delete Device
This command allows you to add devices to an open chain file. When
this command is executed, the Device Properties dialog box will be
displayed, prompting you to enter the ISP operations you want to per-
form on the new device. After completing this information, click OK on
the dialog box. The ISP software will then append information about
the new device to the existing chain file.
Before you can use this command you must solder a new Atmel ISP
device and connect it to your existing JTAG hardware chain on your
circuit board. The device type, its position in the chain, the JEDEC file
used and JTAG instruction width must all be specified in the Device
Properties dialog box.
The ISP software requires you to enter this information for all devices
in your JTAG hardware chain whether they are Atmel or non-Atmel
ISP devices. This is necessary so the software can perform the right
ISP operation on the right device on your circuit board.
This command allows you to edit the device information in an open
chain file. You can use this command if you want to change the ISP
operations you want to perform. A prompt will appear asking you
to enter the device number in the JTAG chain that you want to mod-
ify. After you enter the device number, the Device Properties dialog
box will reappear. You can then change the ISP operations for the
appropriate device. Click OK when done. The ISP software will auto-
matically update your chain file.
This command deletes devices from an open chain file. When this
command is executed, it will prompt you to enter the device numbers
you want to delete. Click OK. The chain file will be updated and
devices renumbered automatically. Before you can use this com-
mand, you must remove the Atmel devices you want to delete from
the JTAG chain on your circuit board. The device type, its position in
the chain, the JEDEC file used and the JTAG instruction width must
all be specified in the Device Properties dialog box. These must
match your JTAG hardware chain on your circuit board. To correctly
use the ISP software, you must specify information about all devices
in your JTAG chain, including non-Atmel devices.
Atmel ATF15xx Family: ISP Devices User Guide