FS-9003 Digi International, FS-9003 Datasheet - Page 11

• Manufacturer Part Number: FS-9003
• Description: JTAG-BOOSTER FOR XSCALE 3.3V
• Manufacturer: Digi International
• Series: Digi/FS Forthr
• Type: FLASHr

Specifications of FS-9003

• Contents: Programmer and Associated Interface Software
• For Use With/related Products: Intel XScale, 3.3V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) The real length of the boundary scan register is displayed here and
(11) Two Flashes Intel 28F128 selected with CS0# where found.
(12) The resulting data bus size is printed here.
JTAG_XScaleb.doc
The initialization file JTAG250.INI was found in the current directory.
The target identification line of the initialization file is printed here.
The resulting I/O-address of the parallel port is printed here. With
WinNT/Win2000/WinXP you must specify the option /LPT2 to access to
the standard address 378h.
A JTAG-Booster is found on the parallel port
The JTAG chain is analyzed. There may be several parts in the JTAG
chain. The chain is analyzed and all parts except the Intel PXA210/250 are
switched to bypass mode.
The revision (1
Revision 0 -> PXA250 A0
Revision 1 -> PXA250 A1
Revision 2 -> PAA250 B0
Revision 3 -> PXA250 B1
Revision 4 -> PXA250 B2
Revision 5 -> PXA26x B0, use JTAG255.EXE
Revision 6 -> PXA255 A0, use JTAG255.EXE
The length of all instruction registers in the JTAG chain are added.
The position of the Intel XScale in the JTAG chain is assumed to be zero,
if not specified in the command line (see option /CPUPOS=).
The position of the JTAG instruction register of the Intel XScale is
assumed to be zero, if not specified in the command line (see option
/IROFFS=).
compared with the boundary scan register length of a Intel PXA210/250.
st
digit of the ID) is relevant for the PXA2xx family:
11