H3DE-S2 AC/DC24-230 Omron, H3DE-S2 AC/DC24-230 Datasheet - Page 31

• Manufacturer Part Number: H3DE-S2 AC/DC24-230
• Description: RELAY TIMER ANALOG DIN 4 MODE
• Manufacturer: Omron
• Series: H3DEr

Specifications of H3DE-S2 AC/DC24-230

• Relay Type: Integrated
• Function: Programmable (Multi-Function)
• Circuit: DPDT (2 Form C)
• Delay Time: 0.1 Sec ~ 120 Hrs
• Output Type: Mechanical Relay
• Contact Rating @ Voltage: 5A @ 250VAC
• Voltage - Supply: 24 ~ 230VAC/DC
• Mounting Type: DIN Rail
• Termination Style: Screw Terminal
• Timing Adjustment Method: Screwdriver Slot
• Timing Initiate Method: Input Voltage
• Lead Free Status / RoHS Status: Contains lead / RoHS compliant by exemption
• Other names: H3DE-S2 AC/DC 24-230; H3DES2ACDC24230; Z1141

J TERMINAL ARRANGEMENT
Note: DC supply voltage does not require the designation of
J WIRING
The H3DE has a high impedance circuit. Therefore, the H3DE
may not be reset if the H3DE is influenced by inductive voltage.
In order to eliminate any influence of inductive voltage, the wires
connected to the H3DE must be as short as possible and should
not be installed alongside power lines. If the H3DE is influenced
by inductive voltage that is 30% or more of the rated voltage,
connect a CR filter with a capacitance of approximately 0.1 µF
and a resistance of approximately 120 Ω or a bleeder resistor
between the power supply terminals. If there is any residual
voltage due to current leakage, connect a bleeder resistor
between the power supply terminals.
Installation
polarity.
J OPERATION
An interval of 3 s minimum is required to turn on the H3DE after
the H3DE is turned off. If the H3DE is turned on and off
repeatedly with an interval of shorter than 3 s, the internal parts
of the H3DE may deteriorate and the H3DE may malfunction.
If it is required that the output be turned on repeatedly with an
interval of shorter than 3 s, consider use of the H3DE-M2/-M1 in
mode D (signal OFF-delay).
Power
Output
state 1
Output
state 2
3 s min.