H5F-B Omron, H5F-B Datasheet - Page 15

• Manufacturer Part Number: H5F-B
• Description: TIMER DIGITAL DAILY 100-240VAC
• Manufacturer: Omron
• Series: H5Fr

Specifications of H5F-B

• Timing Range: 24 Hrs x 7 Days
• Supply Voltage: 100 V to 240 V
• Display Type: LCD Backlight
• Termination Style: Screw
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: H5FB; Z1142

2. Return the setting of the output ON/OFF switch from
Using Override and Automatic Return Operation for
Pulse-output Operation
Override and automatic return operation proceeds in the following
way when used for pulse-output operation.
• If override and automatic return operation starts with a forced ON,
• If override and automatic return operation starts from a forced OFF,
The operation method is the same as for timer operation.
Example 1: Override and automatic return operation
Example 2: Override and automatic return operation
Regular
program
Output
Regular
program
Output
Note: 1. This operation is possible in run mode only.
output is turned ON for the time corresponding to the set pulse
width.
output remains OFF until the pulse output ends.
OFF to AUTO while holding down the
The OFF state will be held from the point at which this
operation is performed (indicated by the arrow) until
the next (regular) ON time.
2. Override and automatic return operation can be cleared by
3. Override and automatic return operation cannot be set or
4. Override and automatic return operation is cleared if any of
Point at which the Output ON/OFF Key changes from
AUTO to ON.
Point at which the Output ON/OFF Key changes from
ON to AUTO with the
Point at which the Output ON/OFF Key changes from
AUTO to ON.
Point at which the Output ON/OFF Key changes from
ON to AUTO with the
setting the output ON/OFF switch to the opposite of the
present status. For example, if the output is ON, override
and automatic return operation can be cleared by setting
the output ON/OFF switch to OFF.
cleared if power is not being supplied to the Time Switch.
the settings are changed.
starting with a forced ON while output is ON
(pulse width: 30 min)
starting with a forced ON while output is OFF
(pulse width: 30 min)
30 min
30 min
WRITE
WRITE
Key held down.
Key held down.
WRITE
From the next
time onwards,
output operates
according to the
regular program.
Key.
From the next time
onwards, output
operates
according to the
regular program.
AUTO
OFF
ON
Switch
Example 3: Override and automatic return operation
Program Check Function
The days and times at which output turns ON or OFF over the course
of one week can be displayed continuously in the actual order in
which they will occur.
1. Press the
2. Press the
3. If the
Regular
program
Output
Note: 1. The program check can be started from run mode only.
run mode to start the program
check.
The display will flash test and the
day and time of the next change in
output status will be displayed.
The display will change to the day
and time of the next change in out-
put status. (Continue pressing the
times for one week.)
the last setting for the week dis-
played, end is displayed for 2 s and
then the Time Switch automatically
returns to run mode.
WRITE
2. Press the
3. The ON and OFF symbols (
4. Only ON times are displayed for pulse-output operation.
Point at which the Output ON/OFF Key changes from
AUTO to OFF.
Point at which the Output ON/OFF Key changes from
OFF to AUTO with the
reaching the end of the program check function display se-
quence.
program check have no effect on the present operation.
WRITE
Key to display the days and
WRITE
starting from a forced OFF while output is ON
(pulse width: 30 min)
TEST
Key is pressed with
Key for 2 s min. in
Key.
TEST
Key again to return to run mode before
WRITE
Key held down.
The color
/
In the above example, output will
turn OFF at 5:30 pm on Monday.
SU MO TU WE TH FR SA
SU MO TU WE TH FR SA
PW
PM
PW
SU MO TU WE TH FR SA
In the above example, output will
turn ON at 1:15 pm on Monday.
PM
PW
From the next
time onwards,
output operates
according to the
regular program.
) displayed during
e nd
indicates flashing items.
5 30
1 15
te st
te st
H5F
15