80PK-25 Fluke Electronics, 80PK-25 Datasheet - Page 3
80PK-25
Manufacturer Part Number
80PK-25
Description
PROBE PIERCING TEMP SUREGRIP
Manufacturer
Fluke Electronics
Series
SureGrip™r
Type
K-Type Thermocoupler
Specifications of 80PK-25
Usage
Liquids, Gels
Tip - Type
Immersion / Penetration, Pointed
Plug Type
Sub-Mini (Thermocouple Plug)
Probe Temperature Range
-40 ~ 662°F (-40 ~ 350°C)
Cable Length
39.370" (1000.00mm)
Cable Insulation
Poly-Vinyl Chloride (PVC)
Plug Color
Yellow
Probe Length
4.000" (101.60mm)
Probe Material
Stainless Steel
For Use With
614-1037 - THERMOMETER HVACPRO IR
Lead Free Status / RoHS Status
Lead free by exemption / RoHS compliant by exemption
Other names
2098706
Measurement Considerations
Instrument Compatibility
The 80PK-25 is compatible with any temperature-
measuring instrument that accepts Type K thermocouples,
has a miniature thermocouple connector, and has cold
reference junction compensation. Accuracy of the
temperature-measuring instrument must be considered
along with the 80PK-525 accuracy specification to
determine the overall accuracy of the combination.
Temperature Limitations
The tip of the 80PK-25 has a continuous temperature
rating of 816 °C (1500 °F). However the opposite end of
the sheath nearest the handle should not be subjected to
temperatures greater than 125 °C. This is the maximum
temperature limitation of the Hytrel handle. See Food
Service Limitations.
Exposure Limitations
The sheath material of the 80PK-25 is stainless steel. It
should not be exposed to halides or sulfides.
Food Service Limitations
The 316 stainless steel probe is suitable for contact with
hot or cold foods within the specified temperature range of
the probe. However the handle is made of Hytrel 5556
which is suitable for repeat food contact only under the
following conditions: food temperature under 65 °C
(150 °F), food alcohol content under 8 %. Food may be
wet, dry, or fatty. Also, the cable should not come in
contact with food.
Operation
Use the 80PK-25 as follows:
Connect the 80PK-25 to a compatible Type K measuring
instrument using the miniature (0.312 inch spacing)
thermocouple connector.
Turn on the measuring instrument, and select the
appropriate range and scale.
Check the read out on the measuring instrument. With no
heat or cold source applied to the bead, the measuring
instrument should display the ambient (room) temperature.
If the instrument does not read out properly, refer to
“Troubleshooting”.
Measuring Technique
The 80PK-25 Piercing Probe should be inserted at least
31.75 mm (1.25 in) into the substance to be measured to
minimize the shunting effect of the sheath.
Troubleshooting
With no heat or cold applied to the probe, the measuring
instrument should display the ambient temperature. If the
measuring instrument does not read out properly, try the
following:
Verify that the measuring instrument is designed to be
used with Type K thermocouples. The measuring
instrument should have a yellow input connector and / or
be marked with a “K”.
Check for an open circuit indicator on the measuring-
instrument. Some temperature-measuring instruments