2-231652-0 Tyco Electronics, 2-231652-0 Datasheet - Page 6

• Manufacturer Part Number: 2-231652-0
• Description: TOOL CRIMP MODULAR W/O DIES
• Manufacturer: Tyco Electronics
• Type: Crimp Tool Assemblyr

Specifications of 2-231652-0

• Tool Type: Handle, Frame - without Die Set
• Features: Top Entry, Ratchet
• Crimp Tool: Hand Held Crimp Tool
• Product: Crimping, Stripping & Cutting Tools & Drills
• Description/function: Hand crimp tool assembly, modular plug
• For Use With: A9926 - DIE SET 8POS MOD PLUG CAT 5A9927 - DIE SET 6POS MOD PLUG OFFSETA9030 - DIE SET 6 POS (LONG BODY) PLUGSA9905 - DIE, 6 POS MOD PLUG IS9611A9906 - DIE FOR 4 POSITION TOOL (GREEN)A9904 - DIE FOR 8 POSITION TOOL (BLK)
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Modular Connectors
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: A9931

B. Die Closure Inspection
The tool and die set is inspected for proper operation
before shipment. To ensure uniform performance over
the life of the tool, periodically inspect as follows:
6 of 7
Y
Refer to Figure 2 for a cross–reference of tool to die set part numbers.
1. Insert a properly stripped cable of appropriate
type and size into a sample modular plug. Then
insert the unterminated cable and plug into the die
cavity.
2. Squeeze tool handles together slowly, while
watching to ensure indenter bottoms against nest.
3. Release handles to open die set, and remove
terminated modular plug assembly.
4. Test for proper crimp height according to
Section 4, Step 4. If plug crimp height is within
acceptable limits, lightly lubricate the tool and die
ITEM
1
2
3
4
5
6
7
8
9
6
PART NUMBER
2–231652–0
4–23619–8
2–23620–5
69.8 [2.75]
993314–1
853400–[ ]
768522–1
30.5 [1.20]
(Handles
Closed)
21045–3
21045–6
21045–1
Y
10
SCREW, Pan Head 4–40
PIN, Grooved
RING, Retaining, Crescent
PIN, Center, Straight
RING, Retaining, Crescent
DIE SET
TOOL ASSEMBLY (Frame Without Die Set)
RING, Retaining, Crescent
PIN, Handle (Pawl)
Modular Plug Hand Tool (Premium Grade) 231652–[ ]
1
REPLACEMENT PARTS
Figure 8 (cont’d)
2
3
7. REPLACEMENT AND REPAIR
Customer–replaceable parts are provided in Figure 8.
A complete inventory should be stocked and
controlled to prevent lost time when replacement of
parts is necessary. Order replacement parts through
your representative, or call 1–800–526–5142, or send
a facsimile of your purchase order to 717–986–7605
or write to:

DESCRIPTION
.250 L (Die Holding)
set, and place it back into service. If the crimp
height is not within acceptable limits, return the tool
(with die set) to Tyco Electronics for evaluation
(refer to Section 7).
CUSTOMER SERVICE (038–035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105–3608
4
5
197 [7.75]
8
9
7
Weight: .3 kg [.75 lb] (Approx)
QTY PER TOOL
408–9767
1
2
4
1
2
1
1
2
2
Rev H