63811-7900 Molex Inc, 63811-7900 Datasheet - Page 3

• Manufacturer Part Number: 63811-7900
• Description: TOOL HAND CRIMP 28-32AWG 1.25MM
• Manufacturer: Molex Inc
• Series: PremiumGrade™, PanelMate™, Pico-Gold™r
• Type: Crimp Toolr

Specifications of 63811-7900

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Crimp Size: 32AWG To 28AWG
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Contacts, 28-32 AWG
• For Use With: WM5506TR - CONN TERM FEMALE 28-30AWG GOLD50753-8141 - CONN TERMINAL 30-32AWG CRIMP0505168041 - CONN TERM FEMALE 28-32AWG GOLDWM5506 - CONN TERM FEMALE 28-30AWG GOLD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 063811-7900; 063811-7900-E; 0638117900; 0638117900-E; 63811-7900-E; 638117900; 638117900-E; WM9805

Hand Crimp Tool for 1.25mm (.049”) Pitch Crimp Terminals
Doc No: ATS-638117900
Revision: B
PRE-STRIPPED
4. Release the locator button, allowing the locator to return to the
5. Close the tool handle until the first ratchet position engages. See
6. Insert the properly stripped wire through the terminal and against the
7. Crimp the terminal by squeezing the tool handles until the ratchet
Note: The tamper proof ratchet action will not release the tool until it has been fully closed.
8. Remove the crimped terminal from the terminal locator by pulling on the wire.
9. Visually inspect the crimped terminal for proper crimp location.
10. On some large O.D. wires, it may not be possible to insert the wire with the tool partially closed. Those wires
WIRE
TERMINAL
PUSHED THRU
crimping position.
Figure 4.
wire stop. See Figure 5.
mechanism cycle has been completed. Release the handles to open
the jaws.
should be inserted with the hand tool in the open position. Insert the wire above the terminal in the punch and
against the wire stop then close the tool. See Figure 6.
LOCATOR
TOOLING
TERMINAL
Release Date: 05-31-07
Revision Date: 04-28-08
WIRE AGAINST THE
WIRE STOP
PUSHED IN
Figure 3
LOCATOR
BUTTON
Figure 5
WIRE
UNCONTROLLED COPY
LOCATOR
TERMINAL
WIRE STOP IS PART
OF THE LOCATOR
TERMINAL
POSITION
OPEN
FIRST RATCHET
POSITION
CLOSE HANDLE
PARTIALLY
PARTIALLY
TOOLING
LOCATOR BUTTON
CLOSED
Figure 4
RELEASE
Page 3 of 8