63811-7900 Molex Inc, 63811-7900 Datasheet - Page 6

• Manufacturer Part Number: 63811-7900
• Description: TOOL HAND CRIMP 28-32AWG 1.25MM
• Manufacturer: Molex Inc
• Series: PremiumGrade™, PanelMate™, Pico-Gold™r
• Type: Crimp Toolr

Specifications of 63811-7900

• Tool Type: Hand Crimper
• Features: Side Entry, Ratchet
• Product: Crimping, Stripping & Cutting Tools & Drills
• Crimp Size: 32AWG To 28AWG
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Contacts, 28-32 AWG
• For Use With: WM5506TR - CONN TERM FEMALE 28-30AWG GOLD50753-8141 - CONN TERMINAL 30-32AWG CRIMP0505168041 - CONN TERM FEMALE 28-32AWG GOLDWM5506 - CONN TERM FEMALE 28-30AWG GOLD
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 063811-7900; 063811-7900-E; 0638117900; 0638117900-E; 63811-7900-E; 638117900; 638117900-E; WM9805

Hand Crimp Tool for 1.25mm (.049”) Pitch Crimp Terminals
Doc No: ATS-638117900
Revision: B
Warranty
How to Adjust Tool Preload
This hand tool is factory preset to 25-45 LBS. preload. It may be necessary over the life of the tool to adjust tool
handle preload force. Listed below are the steps required to adjust the crimping force of the hand tool to obtain
proper crimp conditions:
1. Hold the hand tool in the palm of your hand as shown in Figure 12. Using the index finger squeeze the link
2. Rotate the setting wheel counter-clockwise (CCW) to increase handle force. The numbers will display higher.
3. Release the link to lock the setting wheel in place.
4. Check the crimp specifications or
This tool is for electrical terminal crimping
purposes only. This tool is made of the
best quality materials. All vital
components are long life tested. All tools
are warranted to be free of manufacturing
defects for a period of 30 days. Should
such a defect occur, we will repair or
exchange the tool free of charge. This
repair or exchange will not be applicable
to altered, misused, or damaged tools.
This tool is designed for hand use only.
Any clamping, fixturing, or use of handle extensions voids this warranty.
CAUTIONS:
1. Manually powered hand tools are intended for low volume or field repair. This tool is
2. Insulated rubber handles are not protection against electrical shock.
3. Wear eye protection at all times.
4. Use only the Molex terminals specified for crimping with this tool.
towards the top of the hand tool frame. This will release the preload adjustment wheel.
To decrease handle force rotate the setting wheel clockwise (CW).
conduct a pull test after tool handle
preload force is adjusted.
production use. Repetitive use of this tool should be avoided.
CAUTION: Molex crimp specifications are valid only when used with Molex terminals and tooling.
Release Date: 05-31-07
Revision Date: 04-28-08
(See Figure 10)
SETTING
WHEEL
UNCONTROLLED COPY
RELEASE LEVER
RATCHET
THE HANDLE
THE LINK IN
SQUEEZE
NOT
intended for
Figure 12
TOOL IN POSITION
HOLD THE HAND
Page 6 of 8