1-543382-1 Tyco Electronics, 1-543382-1 Datasheet - Page 4
1-543382-1
Manufacturer Part Number
1-543382-1
Description
TOOL INSERT/EXTRACT TIP 25-KIT
Manufacturer
Tyco Electronics
Series
AMPLIMITE®r
Type
Extraction Toolr
Specifications of 1-543382-1
Tool Type
Insertion/Extraction Tool
Product
Extraction Tool
Fits Cable/wire
28-24 AWG
For Use With
Amplimite 24-28 AWG HD-20 And HD-22 Contacts
Lead Free Status / RoHS Status
Not applicable / Not applicable
For Use With/related Products
D-Sub Terminals
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
4.4. Extracting A Posted Contact
5. TOOL INSPECTION/REPLACEMENT
Insertion/Extraction Tool is inspected before
shipment. Tyco Electronics recommends that the tool
4
Insertion/Extraction Tool 91285-1 and Replacement Tip Kits 543382-[ ]
of 5
1. Place the extraction tip over the contact post.
Move the tool along the post until the tip enters the
contact cavity.
2. Align the groove of the extraction tip with the
contact stabilizer as shown in Figure 6.
3. Push the tip past the stabilizer and straight into
the cavity until it bottoms.
4. For a receptacle style connector, insert a 1.02
mm [.040 in.] diameter pin straight into the FRONT
of the contact cavity. For a plug style connector,
push on mating tip of contact with a suitable
device.
5. Apply pressure to remove the contact and tool
from the contact cavity.
1.02 [.040] Pin Dia.
Extraction Tip
(Figure 6)
(Figure 7)
Tyco Electronics Corporation
Back of Connector
Figure 6
Contact Post
be inspected immediately upon its arrival to ensure
that the tool has not been damaged during shipment,
and that the tool conforms to the dimensions provided
in Figure 7.Customer–replaceable parts are provided
in Figure 7. If the tool becomes broken or damaged,
replacement and/or spare parts can be purchased by
contacting:
For tool repair service, please contact an Tyco
Electronics Representative at 1–800–526–5136.
6. REVISION SUMMARY
CUSTOMER SERVICE (38–35)
TYCO ELECTRONICS CORPORATION
P.O. BOX 3608
HARRISBURG, PA 17105–3608
Groove of Extraction
Tip Aligned with
Contact Stabilizer
S Updated document to corporate requirements
S New format
408-9404
Rev
A