1102855-3 Tyco Electronics, 1102855-3 Datasheet - Page 28

• Manufacturer Part Number: 1102855-3
• Description: TOOL EXTRACTION SOLARLOK
• Manufacturer: Tyco Electronics
• Series: Solarlok®r

Specifications of 1102855-3

• Tool Type: Extraction Tool
• Tyco/amp Hvt Series Crimp Contact Heavy-duty Connectors & Solarlok Photovoltaic Interconnection System: RoHS Compliant
• Product: Tools
• Description/function: Extraction tool
• For Use With: 6-1105301-1 - CONN SOCKET 22-26AWG SILVER2-1105301-2 - CONN SOCKET 17-18AWG GOLD1-1105301-2 - CONN SOCKET 20AWG SILVER1-1105301-1 - CONN SOCKET 20AWG SILVER3-1105300-2 - CONN PIN 15AWG GOLD2-1105300-2 - CONN PIN 17-18AWG GOLD1-1105300-2 - CONN PIN 20AWG GOLD1-1105300-1 - CONN CONTACT MALE 20AWG CRIMP2-1105301-1 - CONN CONTACT SOCKET HVT SERIES2-1105300-1 - CONN CONTACT PIN HVT SERIES5-1105301-1 - HVT-C-BU.AG.4,0 QMM4-1105301-1 - HVT-C-BU.AG.2,5 QMM3-1105301-2 - HVT-C-BU.AU.1,5 QMM5-1105300-1 - HVT-C-STI.AG.4,0 QMM4-1105300-1 - HVT-C-STI.AG.2,5 QMM3-1105300-1 - HVT-C-STI.AG.1,5 QMM4-1105300-2 - CONN PIN CRIMP HTS SERIES GOLD3-1105301-1 - CONN SOCKET 15.5 AWG CRIMP SIVER4-1105301-2 - CONN TERM FEMALE CRIMP GOLD
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: Rectangular Connectors
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1102855-3; A98837

3.2 Connector Latching
3.3 Disconnecting
26
SOLARLOK Interconnection System
Assembly and Installation Guidelines
When mating the SOLARLOK connectors, ensure the following:
■
■
■
Disconnect circuit from load before unplugging connectors.
Cable assemblies should be labeled using Tyco Electronics Label, Part No. 1394470-1.
Unmating of the connector
All specifications subject to change. Consult Tyco Electronics for latest specifications.
C A U T I O N : This connector must not be disconnected under load.
Connectors labeled with a plus or minus are keyed and can only be mated to similarly marked and
keyed connectors.
The polarity of the “neutral” connector must labeled with Part No. 1394725-1 or Part No. 1394725-2
nearby the connector.
The connector system is fully latched only when the latches are flush with the mating connector.
After the connector is fully latched, the optional latch locking clip may be snapped into place.
1 The locking mechanism is opened by depressing the latches.
2 Pull out the connectors. While depressing the latches,
C A U T I O N :
The “neutral” designated pin connectors incorporate no keying features and must
only be used for Serial Interconnection of Photovoltaic Modules.
The neutral product should not be used where maintaining polarity is critical.
disconnect the connector by pulling the connector halves apart.
2
1
1
(continued)
CAUTION: Do not disconnect the connector under load!
Catalog 889753-3
Fig. 7
(Female Connector)
Revised 6-2008
Fig. 8