1055419-1 Tyco Electronics, 1055419-1 Datasheet - Page 2

• Manufacturer Part Number: 1055419-1
• Description: WRENCH TORQUE 5/16" FOR SMA
• Manufacturer: Tyco Electronics

Specifications of 1055419-1

• Tip - Type: Torque, 0.31" (8.0mm)
• Tool Type: Wrench
• Features: Protective Cover and Interchangeable Head
• Length: 7.0" (177.8mm)
• Drive Size - Metric: 7.9mm
• Overall Length: 177mm
• Rf Series: SMA
• Product: Tools & Accessories
• Polarity: Normal
• Accessory: Production Torque Wrench
• Connector Type: SMA (OSM)
• Mounting Angle: Straight
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Lead Free Status / RoHS Status: na, Not applicable / Not applicable
• Other names: 1055419-1; A99929

Rev E
Figure 2
Using the appropriate sized head (Figure 1), turn the
wrench clockwise (or counterclockwise) until there is
an audible "click." This "click" indicates that the proper
torque has been achieved.
4. REPLACEMENT
Remove the wrench head by pulling it off the
production torque wrench. Then replace the head with
the appropriate head listed in Figure 2.
Order replacement parts through your Tyco
Electronics Representative, or call 1-800-526-5142, or
send a facsimile of your purchase order to 717-986-
7605, or write to:
5. REVISION SUMMARY
Since the previous release of this document, the TE
logo has been applied.
CAUTION
CAUTION
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
!
!
Do NOT overtighten the connector with the torque
wrench. Over-tightening the wrench could result in
inaccurate torque settings.
Do not use or re-terminate damaged connectors.
408-8676
2 of 2