PDH10-37 Panduit Corp, PDH10-37 Datasheet - Page 36

• Manufacturer Part Number: PDH10-37
• Description: HOSE AIR SUPPLY
• Manufacturer: Panduit Corp
• Type: Accessory, Hoser

Specifications of PDH10-37

• Features: -
• For Use With/related Products: -

Error Message
6. Dispenser Jam - Check Tie
7. Jaw Sensor Error
8. Detent Sensor Blocked or Dirty
9. Blocked Hose - Failed Back
• Cable ties are too moist
- Turn down tension until correct
cut-off occurs.
(due to high humidity)
Loading
Pressure Test
PAT1M/PAT1.5M: PA22222A01_03
INCORRECT CABLE TIE
(Long cut-off / tail)
CUT-OFF
PAT1M / PAT1.5M OPERATION MANUAL
CABLE TIE CONDITION FACTORS
a. Press “Buzzer” button, open Dispenser door, Press
b. If having trouble clearing jam, contact Maintenance
Contact Maintenance Department
CORRECT CABLE TIE
“Unload” button while pulling back lightly on strip of
cable ties until all cable ties are removed. Cut off bad
cable ties and reload.
Department. (Note: Don’t pry on white plastic roller; will
cause damage.
CUT-OFF
Page: 34 of 36
Corrective Action
• Cable ties are too brittle
- Take new reel of ties out of
- Place new ties on PDM.
- Place used reel in bag with
(due to dry conditions)
original bag.
damp paper towel or
sponge to recondition.
CABLE TIE DETACHES
FROM BUNDLE
Dec., 2007