ZX-EDA11 2M Omron, ZX-EDA11 2M Datasheet - Page 2

• Manufacturer Part Number: ZX-EDA11 2M
• Description: AMP UNIT 12-24VDC PWR SPLY NPN
• Manufacturer: Omron

Specifications of ZX-EDA11 2M

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: ZX-EDA112M; ZXEDA112M

Accessories (Order Separately)
Calculating Unit
Amplifier Mounting Brackets
A ZX-XBE1 is provided with the Sensor. Order an
Amplifier Mounting Bracket separately if required.
(Refer to Dimensions on page 14.)
Logging Tool for Personal Computers
(Refer to Dimensions on page 15.)
Specifications
■ Sensor Heads
2
Measurement range
Sensing object
Standard reference object
Resolution *1
Linearity *2
Linear output range
Temperature characteristic *3
(including Amplifier Unit)
Ambient
temperature
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance (destruction)
Shock resistance (destruction)
Degree of protection (Sensor Head) IEC60529, IP65
Connection method
Weight (packed state)
Materials
Accessories
Appearance
Appearance
Appearance
Operating
Storage
Sensor
Head
Preamplifier
ZX-E Series
Communications
Interface Unit
Smart Monitor (Logging Software
+ Function Setting Software)
*4
Case
Sensing surface
Tightening nut
Toothed washer
*4
(Refer to Dimensions on page 14.)
Model
Name
ZX-CAL2
ZX-XBE1
ZX-XBE2
Smart Sensors (Inductive Displacement Type)
RS-232C
USB
0 to 0.5 mm
Magnetic metals (Measurement ranges and linearities are different for non-magnetic metals. Refer to En-
gineering Data on page 4.)
18×18×3 mm
Material: ferrous (S50C)
1 μm
±0.5% F.S.
Same as measurement range.
0.15% F.S./°C
0 to 50°C (with no ic-
ing or condensation)
Operating and storage: 35% to 85% (with no condensation)
50 MΩ min. (at 500 DC)
1,000 VAC, 50/60 Hz for 1 min between charged parts and case
10 to 55 Hz with 1.5-mm double amplitude for 2 h each in X, Y, and Z directions
500 m/s
Connector relay (standard cable length: 2 m)
Approx. 120 g
Brass
Heat-resistant ABS
PES
Amplifier Mounting Brackets (ZX-XBE1), Instruction Manual
Model
ZX-EDR5T
2
Model
, 3 times each in X, Y, and Z directions
Attached to
each Sensor
Head
For DIN track
mounting
ZX-SF11
ZX-SF21
ZX-SW11EV3
(See note 1.)
---
---
Remarks
Model
0 to 1 mm
0.07% F.S./°C
−10 to 60°C (with no icing or condensation)
−20 to 70°C (with no icing or condensation)
IEC60529, IP67
Approx. 140 g
Stainless steel Brass
ZX-ED01T
0 to 2 mm
30×30×3 mm
Brass (nickel-plated) (except ZX-ED02T)
Iron (zinc-plated) (except ZX-ED02T)
Setup Tool for Personal Computer
Note 1. The ZX-SFW11EV3 or ZX-SW11EV3 is required to use the
Cables with Connectors on Both Ends (for
Extension)
Bank Unit
1 m
4 m
8 m
ZX-ED02T/
* Robot cable models are also available. The model numbers are
ZX-XC@R.
EM02T
Appearance
Cable length
2. The Smart Monitor Basic does not have a logging function.
Smart Monitor with the ZX-LDA11-N/41-N. Earlier versions
cannot be used.
Other than the logging function, the Smart Monitor Basic sup-
ports the same functions as the Smart Monitor.
+
Appearance
0 to 7 mm
60×60×3 mm
Approx. 160 g
ZX-EM07MT
(Refer to Dimensions on page 15.)
Communications Interface
Unit (RS-232C) + Smart
Monitor Basic*2 (Function
Setting Software)
ZX-XC1A
ZX-XC4A
ZX-XC8A
Model
0 to 4 mm
Approx. 130 g
Zinc (nickel-plated) Brass
Name
ZX-SB11
ZX-EV04T
---
---
1
Model
*
0 to 2 mm
45×45×3 mm
±1.0% F.S. *5
0.1% F.S./°C
−10 to 200°C
−20 to 200°C
IEC60529, IP60 *6
Approx. 160 g
PEEK
Brass (nickel-plated)
Iron (zinc-plated)
ZX-SFW11EV3
(See note 1.)
Quantity
ZX-EM02H
Model