PIC18F27J53-I/SP Microchip Technology, PIC18F27J53-I/SP Datasheet - Page 399

• Manufacturer Part Number: PIC18F27J53-I/SP
• Description: IC PIC MCU 128KB FLASH 28SPDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F27J53-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 128KB (64K x 16)
• Package / Case: *
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 22
• Ram Size: 3.8K x 8
• Voltage - Supply (vcc/vdd): 2.15 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 3.8 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 16
• Number Of Timers: 8
• Operating Supply Voltage: 2.15 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• Minimum Operating Temperature: - 40 C
• Controller Family/series: PIC18
• Cpu Speed: 48MHz
• Embedded Interface Type: I2C, SPI, USART
• Digital Ic Case Style: DIP
• Supply Voltage Range: 1.8V To 5.5V
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

RETURN
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Example:
 2010 Microchip Technology Inc.
Q Cycle Activity:
After Instruction:
operation
Decode
PC = TOS
Q1
No
operation
operation
Return from Subroutine
RETURN {s}
s  [0,1]
(TOS)  PC,
if s = 1
(WS)  W,
(STATUSS)  Status,
(BSRS)  BSR,
PCLATU, PCLATH are unchanged
None
Return from subroutine. The stack is
popped and the top of the stack (TOS)
is loaded into the program counter. If
‘s’= 1, the contents of the shadow
registers, WS, STATUSS and BSRS,
are loaded into their corresponding
registers, W, Status and BSR. If
‘s’ = 0, no update of these registers
occurs (default).
1
2
RETURN
0000
Q2
No
No
0000
operation
Process
Data
Q3
No
0001
from stack
operation
POP PC
Q4
No
001s
Preliminary
RLCF
Syntax:
Operands:
Operation:
Status Affected:
Encoding:
Description:
Words:
Cycles:
Example:
Q Cycle Activity:
PIC18(L)F2X/4XK22
Before Instruction
After Instruction
Decode
REG
C
REG
W
C
Q1
=
=
=
=
=
register ‘f’
Rotate Left f through Carry
0  f  255
d  [0,1]
a  [0,1]
(f<n>)  dest<n + 1>,
(f<7>)  C,
(C)  dest<0>
C, N, Z
The contents of register ‘f’ are rotated
one bit to the left through the CARRY
flag. If ‘d’ is ‘0’, the result is placed in
W. If ‘d’ is ‘1’, the result is stored back
in register ‘f’ (default).
If ‘a’ is ‘0’, the Access Bank is
selected. If ‘a’ is ‘1’, the BSR is used to
select the GPR bank.
If ‘a’ is ‘0’ and the extended instruction
set is enabled, this instruction
operates in Indexed Literal Offset
Addressing mode whenever
f 95 (5Fh). See
“Byte-Oriented and Bit-Oriented
Instructions in Indexed Literal Offset
Mode”
1
1
RLCF
RLCF
Read
0011
Q2
1110 0110
0
1110 0110
1100 1100
1
for details.
C
f {,d {,a}}
01da
Process
REG, 0, 0
Data
Q3
DS41412D-page 399
Section 25.2.3
register f
ffff
destination
Write to
Q4
ffff