13193EVK-A00 Freescale Semiconductor, 13193EVK-A00 Datasheet - Page 28

• Manufacturer Part Number: 13193EVK-A00
• Description: KIT ZIGBEE RF MC13193
• Manufacturer: Freescale Semiconductor
• Type: 802.15.4/Zigbeer

Specifications of 13193EVK-A00

• Contents: Hardware, Software and Documentation
• Wireless Frequency: 2.4 GHz
• Interface Type: SPI
• Modulation: DSSS OQPSK
• Security: 128 bit AES
• For Use With/related Products: MC13193
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

5.7.1 13192-EVB Setup for USB Operation (Test Tool Utilities)
To setup the 13192-EVB for USB operation, perform the following steps.
1. Plug the 13192-EVB into a USB port of the PC with the supplied USB cable.
2. Switch the EVB power switch (S106) to USB.
3. Follow the Windows Hardware Manager default options during the driver install.
4. After the install is complete, reboot the system.
1. Reinsert the Evaluation Kit CD.
2. If prompted for the ftdibus.sys driver, select Browse and change to the drivers directory on
3. If prompted for the ftser2k.sys driver, select Browse and change to the drivers directory on
4. After installation is complete, reboot the system.
5.8 Embedded Bootloader
The Embedded Bootloader allows users to flash the 13192-EVB and 13192-SARD without the
BDM programmer/debugger. The Embedded Bootloader is located in a protected 4KB flash
block in the highest memory area (0xF000-0xFFFF) of the MC9S08GT60 which is located on
the 13192-SARD and 13192-EVB boards. If you flash the board with a BDM, the Embedded
Bootloader code is overwritten and you cannot use the Embedded Bootloader utility until you re-
flash the Embedded Bootloader code on the board.
See the Embedded Bootloader Reference Manual (802154EBRM/D) for more information.
5.8.1 Embedded Bootloader Features
5-8
the 13193EVK CD. Reinsert the Evaluation Kit CD and click on the OK button.
the 13193EVK CD. Reinsert the Evaluation Kit CD and click on the OK button.
• Upload firmware in Motorola S19 record format through the UART/USB
• Initialize memory of upload firmware
• Initialize the system clock
• Run time update/change of the NVM
In some cases it may be necessary to manually locate the drivers.
To do so, perform the following steps.
802.15.4 EVK User’s Guide, Rev 0.0
NOTE
Freescale Semiconductor