PIC16F886-E/SS Microchip Technology, PIC16F886-E/SS Datasheet - Page 12

• Manufacturer Part Number: PIC16F886-E/SS
• Description: IC,MICROCONTROLLER,8-BIT,PIC CPU,CMOS,SSOP,28PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F886-E/SS

• Rohs Compliant: YES
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 24
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 368 x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 11x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SSOP
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 368 B
• Interface Type: MSSP, EUSART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 3
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM164123, DM164120-3, DV164122
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 11 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM164123 - KIT MANAGEMENT SYSTEM PICDEM
• Lead Free Status / Rohs Status: Details

PIC16F88X
11. Module: MSSP (SPI Master Mode)
DS80302F-page 12
When the MSSP module is configured as a SPI
master with CKP set, (SPI clock idles high)
disabling the module by clearing the SSPEN bit
will cause the clock line to be driven low for 2 T
before the setting of the RC3 output in the PORTC
register takes effect.
Similarly on enabling the module. There is a 1
T
before the CKP bit takes effect and the line is
driven high.
Work around
A pull-up resistor on the SCK line allows the pin to
be configured as high-impedance during disabling/
enabling the module and the line to be pulled high
by the resistor.
The TRISC3 bit should be set before disabling or
enabling the module to tristate the pin, and then
cleared before transmission.
Affected Silicon Revisions
PIC16F882
PIC16F883/PIC16F884
PIC16F886/PIC16F887
OSC
A0
A0
A2
X
X
X
period where the clock line will be driven low
OSC
© 2009 Microchip Technology Inc.