PBA-1 BANNER ENGINEERING, PBA-1 Datasheet - Page 32

• Manufacturer Part Number: PBA-1
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING

Specifications of PBA-1

• Supply Voltage Max: 130VAC
• Switch Terminals: Screw
• Supply Voltage Min: 105VAC
• Frequency, Operating: 50⁄60 Hz
• Function: Module, Power Block
• Technology: Photoelectric
• Lead Free Status / Rohs Status: RoHS Exempt Product

Banner Engineering Corp. 9714 Tenth Ave. No. Minneapolis, MN 55441
WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will repair or replace,
free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not
cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied.
Only MACHINE-GUARD and PERIMETER-GUARD Systems, and other systems so designated, are designed to meet OSHA and ANSI
machine safety standards for point-of-operation guarding devices. No other Banner sensors or controls are designed to meet these standards,
and they must NOT be used as sensing devices for personnel protection.
!
WARNING
redundant circuitry necessary to allow thier use in personnel safety applications. A sensor failure or malfunction can result
in either an energized or a de-energized sensor output condition.
Never use these products as sensing devices for personnel protection. Their use as a safety device may create an unsafe
condition which could lead to serious injury or death.
The photoelectric presence sensors described in this catalog do NOT include the self-checking
Telephone: [phone]
FAX (applications): [phone]