D10DNFP BANNER ENGINEERING, D10DNFP Datasheet - Page 12

• Manufacturer Part Number: D10DNFP
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Dual Discrete Outputr

Specifications of D10DNFP

• Sensor Output: NPN
• Sensor Input: Fiber Optic
• Output Type: Transistor
• Contact Current Max: 150mA
• Switch Terminals: Connector
• Body Style: Rectangular
• Brand/series: Expert™
• Current, Switching: 150 mA
• Function: Fiber Optic
• Indicator: LCD
• Ip Rating: IP50
• Material, Casing: Black ABS⁄Polycabonate Alloy (Housing)
• Material, Cover: Polycarbonate
• Mounting Type: DIN Rail
• Output: NPN
• Primary Type: Photoelectric
• Sensing Mode: Selectable
• Technology: Photoelectric
• Temperature, Operating: -20 to +55 °C
• Termination: Cable
• Time, Response: 50 μs, 200 μs, 1 ms, 2.5 ms
• Voltage, Supply: 24 VDC
• Accessories Available: Cordsets and Plastic Fiber Optic Cable
• Fiber Optic Sensor Type: Dual Discrete Output
• Lead Free Status / Rohs Status: RoHS Exempt Product

In the unlikely event that the setup parameters are lost or become corrupt, the display will
continuously scroll: “USEr PSF Error.” Reteach the sensor to recover. If the problem persists,
contact your Banner representative for further information.
The pink wire is configured as a gate input. When this wire is pulled low (i.e., to the sensor
ground; 0-0.5V dc), it inhibits the outputs from switching, while all other sensor functions
continue to be enabled. This feature is useful for controlling when the outputs are allowed to
change states. Gate input function response time is 1 millisecond.
D10 Expert
12
Required Fiber-Optic Cable
Sensing Beam
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Installation
Certifications
P/N 64154 rev. F
™
Dual Discrete Outputs
Self-Diagnostic Error Modes
Gate Input
Banner P-Series plastic fibers
Visible red, 680 nm, or
Visible green, 525 nm, depending on model
12 to 24V dc (10% maximum ripple) at less than 65 mA, exclusive of load
Protected against reverse polarity and transient voltage
2 NPN or 2 PNP, depending on model
150 mA maximum load
OFF-state leakage current: < 10 µA at 24V dc
ON-state saturation voltage: NPN < 1.5V at 150 mA load
Protected against false pulse on power-up and continuous short-circuit
Programmable, 50 microseconds, 200 microseconds, 1 millisecond, 2.5 milliseconds
NOTE: < 1 second delay on power-up; outputs do not conduct during this time.
Push-button or remote programming of response time, OFF-delay, light/dark operate, and display
Four-digit digital display plus LED indicators for active channel, push-button lockout, OFF-delay and light/dark
operate selection; 2 yellow output indicators
Black ABS/polycarbonate alloy (UL94 V-0 rated) housing, clear polycarbonate cover
NEMA 1, IEC IP50
PVC-jacketed 2 m or 9 m (6.5' or 30') 6-wire integral cable or integral 6-pin Pico-style quick-disconnect
Temperature: -20° to +55°C (-4° to +131°F)
Storage Temperature: -20° to +80°C (-4° to +175°F)
Max. Rel. Humidity: 90% @ 50°C (non-condensing)
35 mm DIN rail or included mounting bracket
Number of Devices,
PNP < 2.5V at 150 mA load
Stacked
10
3
7
Specifications
Ambient Temperature
Rating
55°C
50°C
45°C
Banner Engineering Corp.
www.bannerengineering.com • Tel: [phone]
•
Minneapolis, MN U.S.A.
Specification
150 mA
50 mA
50 mA
Load