AH-5A BOGEN COMMUNICATIONS, AH-5A Datasheet - Page 52

• Manufacturer Part Number: AH-5A
• Description: Amplified Speaker/horn
• Manufacturer: BOGEN COMMUNICATIONS

Specifications of AH-5A

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

50
MIXERS
P r o d u c t F e a t u r e s :
•
•
•
•
•
•
•
•
•
•
•
CAM MIXERS SELECTION CHART
The CAM2 is a 5-input mixer/pre-amplifier suitable for a wide variety of applications, particularly for expanding the
number of inputs on Bogen or other public address amplifiers. The CAM2 provides four professional, low-impedance,
balanced microphone inputs through XLR connectors and one auxiliary input.
Individual phantom power switches for each input allow the use of both dynamic and condenser microphones on the
same unit. A bridging input permits simple interconnection of multiple CAM2 mixers for system expansion without the
need to sacrifice any mixer inputs. Clipping indicators for each input and an output level meter provide information
to the system operator about sound integrity. Wide frequency response, low distortion, low noise, and high channel
crosstalk isolation ensure superior sound quality. The CAM2’s balanced mixer output can be switched between line
level (+4 dBµ) or microphone level (-50 dBµ) for compatibility with a wide range of sound processing equipment.
CAM8PRO
4 Microphone inputs
Low-impedance, balanced MIC inputs
1 High-impedance AUX input
Low-noise, active mixing
Master volume control
Input clipping indicator for each channel
5-Segment LED output level meter
XLR microphone input connectors
Phantom power selectable per MIC input
Unbalanced line-level output
Balanced XLR output
Model
CAM8
CAM2
Output Level Switch
Switch changes the nominal
signal level of the XLR output
from +4 dBµ to -50 dBµ.
Rear Panel
(4 MIC,
Inputs
1 AUX)
8
5
Output XLR Connector
Provides a balanced output
compatible with most
professional equipment.
Phantom
30V DC
30V DC
12V DC
Voltage
Power/
-
Bridging
Input
●
●
-
Indicator/
Channel
Clipping
●
Compressor/
Bridging
The bridging jacks facilitate the connecting to-
gether of mixers to obtain additional inputs
without using any of the CAM2’s inputs.
Line Output Connector (Line Out)
RCA jack provides unbalanced output signal
compatible with most amplifiers, recording
equipment, and other audio equipment.
Not affected by Output Level switch.
Limiter
●
•
•
•
•
•
•
multiple CAM2 mixers
or WMK1
Illuminated power switch
Switchable output level (+4/-50 dBµ)
UL and C-UL listed
Compact size
Bridging input for connecting together
Rack- or wall-mounted with RPK35B
-
Output Level
11-3/8" W x 2-5/8" H x 7-3/8" D
(8 segments)
(5 segments)
Meter
●
●
Dimensions
Mixer/Pre-Amplifier
CAM2
20 Hz-20 kHz
20 Hz-20 kHz
Frequency
Response
±1 dB,
±1 dB,
-
MIC Equiv.
-129 dBV
-123 dBV
Product
Noise
Weight
Input
3 lb.
Auxiliary Input (AUX In)
A dedicated unbalanced
auxiliary input for tuner,
CD player, etc.
Impedance
MIC/AUX
600/10k
3.5k/20k
ohms
ohms
Input
Phantom Power
The CAM2 provides power for electret
condenser microphones. The Phantom
ON/OFF switch controls the applications
of DC voltage to each MIC input.
Signal-To-
90 dB
75 dB
Noise
Ratio
Accessories
-
unbalanced,
Impedance
220-ohm
440-ohm
balanced
Output
ohms
-
140
MIC Inputs
Balanced MIC level
XLR inputs.
channels)
Crosstalk
(adjacent
> -90 dB
> -90 dB
RPK35B
Rack Mounting
Kit
WMK1
In-Wall
Mounting Kit
-
Info, See:
Page 49
Product
Above
For