IDT79RC32T355-133DH IDT, Integrated Device Technology Inc, IDT79RC32T355-133DH Datasheet - Page 4

• Manufacturer Part Number: IDT79RC32T355-133DH
• Description: IC MPU 32BIT CORE 133MHZ 208-QFP
• Manufacturer: IDT, Integrated Device Technology Inc
• Series: Interprise™r

Specifications of IDT79RC32T355-133DH

• Processor Type: RISC 32-Bit
• Speed: 133MHz
• Voltage: 2.5V
• Mounting Type: Surface Mount
• Package / Case: 208-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -
• Other names: 79RC32T355-133DH

Thermal Considerations
teed in a ambient temperature range of 0° to +70° C for commercial
temperature devices and - 40° to +85° for industrial temperature
devices.
Revision History
Removed references to “edge-triggered interrupt input” for GPIO pins.
Changed 208-pin package designation from DP to DH.
7, 8, 10, 12, and 15. Revised values in Table 18, “DC Electrical Charac-
teristics”; Table 20, “RC32355 Power Consumption”; and Figure 23,
“Typical Power Usage.” Changed data sheet from Preliminary to Final.
a footnote to Table 21.
following signals: MDATA Tdo1, MADDR Tdo2, CASN Tdo3, CKENP
Tdo4, BDIRN Tdo5, BOEN Tdo6.
5, Reset and System AC Timing Characteristics.
115 Kb/s to 1.5 Mb/s.
trical Characteristics.
and Max values for
260 respectively and the Min and Max values for 100 Mbps Thigh1/
Tlow1 were changed to 14.0 and 26.0 respectively.
IDT 79RC32355
The RC32355 consumes less than 2.5 W peak power. It is guaran-
March 29, 2001: Initial publication.
September 24, 2001: Removed references to DPI interface.
October 10, 2001: Revised AC timing characteristics in Tables 5, 6,
October 23, 2001: Revised Figure 23, “Typical Power Usage.”
November 1, 2001: Added Input Voltage Undershoot parameter and
January 30, 2002: In Table 6, changed values from 1.5 to 1.2 for the
May 20, 2002: Changed values in Table 20, Power Consumption.
September 19, 2002: Added COLDRSTN Trise1 parameter to Table
December 6, 2002: In Features section, changed UART speed from
December 17, 2002: Added V
January 27, 2004: Added 180MHz speed grade.
May 25, 2004: In Table 7, signals MIIRXCLK and MIITXCLK, the Min
10
Mbps Thigh1/Tlow1 were changed to 140 and
OH
parameter to Table 18, DC Elec-
4 of 47
May 25, 2004