VX2110-01T-3CR1 SMC Corporation, VX2110-01T-3CR1 Datasheet - Page 46

• Manufacturer Part Number: VX2110-01T-3CR1
• Description: Process Solenoid Valve, 2 port, direct operated, 1/8 port, NC, 110VAC, conduit
• Manufacturer: SMC Corporation
• Type: Direct Operatedr

Specifications of VX2110-01T-3CR1

• Brand/series: VX Series
• Number Of Ports: 2
• Primary Type: Solenoid Valve
• Size, Port: 1⁄8" NPTF
• Voltage, Coil: 110 VAC
• Enclosure: Equivalent to IP65

1. Do not use the valves in an atmosphere
2. Do not use in explosive atmospheres.
3. Do not use in locations subject to vibration or
4. Do not use in locations where radiated heat
5. Employ suitable protective measures in loca-
1. This solenoid valve can be operated without
2. Low frequency operation
Class 1 Turbine Oil (with no additive), ISO VG32
Please contact SMC regarding Class 2 turbine oil (with additives), ISO VG32.
1 Removing the product
Classification of
viscosity (cst)
having corrosive gases, chemicals, salt
water, water steam, or where there is direct
contact with any of these.
impact.
will be received from nearby heat sources.
tions where there is contact with water drop-
lets, oil or welding spatter, etc.
lubrication.
If a lubricant is used in the system, use turbine oil Class 1, ISO VG32
(with no additive). But do not lubricate a valve with EPDM seal.
Refer to the table of brand name of lubricants compliant with
Class 1 turbine oil (with no additive), ISO VG32.
The valve will reach a high temperature when used with high
temperature fluids. Confirm that the valve temperature has
dropped sufficiently before performing work. If touched inadver-
tently, there is a danger of being burned.
1. Shut off the fluid supply and release the fluid pressure in the
2. Shut off the power supply.
3. Dismount the product.
Switch valves at least once every 30 days to prevent malfunction.
Also, in order to use it under the optimum state, conduct a regular
inspection once a half year.
Idemitsu Kosan Co.,Ltd.
Nippon Oil Corp.
Cosmo Oil Co.,Ltd.
Japan Energy Corp.
Kygnus Oil Co.
Kyushu Oil Co.
Nippon Oil Corp.
Showa Shell Sekiyu K.K.
Tonen General Sekiyu K.K.
Fuji Kosan Co.,Ltd.
(40C)
system.
Caution
Warning
Warning
according to
Operating Environment
ISO Grade
Viscosity
2 Port Solenoid Valve for Fluid Control
Precautions 5
Be sure to read this before handling.
For detailed precautions on each series, refer to the main text.
Maintenance
Maintenance
Lubrication
Mitsubishi turbine 32
General R turbine 32
Cosmo turbine 32
Fucoal turbine 32
Kyodo turbine 32
Turbine oil P-32
Stork turbine 32
Turbine oil 32
Turbine oil 32
Turbine 32
32
1. Filters and strainers
2. Lubrication
3. Storage
4. Exhaust the drain from an air filter period-
1. Valves will reach high temperatures from
1. Be careful regarding clogging of filters and strainers.
2. Replace filter elements after one year of use, or earlier if the
3. Clean strainers when the pressure drop reaches 0.1 MPa.
When using after lubricating, never forget to lubricate contin-
uously.
In case of long term storage after use with heated water,
thoroughly remove all moisture to prevent rust and deterioration
of rubber materials, etc.
ically.
high temperature fluids. Use caution, as there
is a danger of being burned if a valve is
touched directly.
pressure drop reaches 0.1 MPa.
Caution
Warning
Operating Precautions
Maintenance
Back page 6