ESX10-124-DC24V-10A E-T-A Circuit Protection and Control, ESX10-124-DC24V-10A Datasheet - Page 7

• Manufacturer Part Number: ESX10-124-DC24V-10A
• Description: CIRCUIT PROTECTOR; 10 A CLASS I, DIVISION 2 ; RESET INPUT AND STATUS OUTPUT ; 24
• Manufacturer: E-T-A Circuit Protection and Control
• Type: Electronicr

Specifications of ESX10-124-DC24V-10A

• Actuator Type: Toggle
• Brand/series: ESX10
• Current, Rating: 10 A
• Mounting Type: Plug-In
• Number Of Poles: 1
• Termination: Blade
• Voltage, Rating: 24 VDC
• Lead Free Status / Rohs Status: RoHS Exempt Product

Module 17plus is a power distribution system for use with electronic
circuit protectors ESX10.
Each module
housing width of only 12.5 mm and fits onto all industry standard
mounting rails.
The two-way modules can be interconnected to provide as many
ways as required with a terminal block fitted at each end for connection
of signalling circuits. A distribution busbar can be fitted on the supply
side of the modules (positive pole) though each pole of multipole
circuit breakers must be individually connected.
Electrical connections are by means of spring-loaded terminals. The
reference potential for the ESX10 (GND pin 11) is also looped through
and connected to the terminal blocks at the sides.
The integral status output SF of the ESX10-104/-106/-124/-127 can
be tapped at terminal 12 of the relevant channel (single signalisation).
The reset input RE may be connected via terminal 13 or 14 (ESX10-
124/-127) or terminal 12 (ESX10-125). The integral control input IN+
of ESX10-115 is connected via terminal 12.
Depending on the version a potential-free signal contact is available
(ESX10-101/-102/-103/-104/-105/-106/-115/-125).
17PLUS-Q02-00
17PLUS-QA0-LR
Authority
UL 60950
Issue C
ESX10-124 Modul
LINE (+)
GND
RE
RE
SF
LOAD (+)
Description
Ordering information
Pin configuration, fitted with ESX10-124 (Example)
Approvals
17 plus
(12)
(13)
(14)
(11)
(2)
(1)
accommodates two protectors with an individual
ESX10 -
Module 17plus, centre piece, two-way
one each left- and right-side terminal block
for supply feed from the side by means of
screw terminal, connection of signalisation
etc.
Voltage ratings
AC 250 V; DC 80 V
operating voltage PLUS, DC 24 V
operating voltage MINUS
reset input RE
reset input RE
status output SF
protected load output
Accessories: Module 17plus
Current ratings
50 A
Accessories for ESX10
www.e-t-a.com
Connection
cable
Line feed (1)
Load output (2)
Signalisation
terminals
(11, 13, 14)
Signalisation
terminal (12)
Voltage rating (without ESX10)
Current rating (without ESX10)
Internal resistance values (without ESX10)
Vibration
Shock
Corrosion
Humidity
Dielectric strength of Module 17plus (without ESX10)
Mass: Module 17plus (centre piece)
Technical data
LINE feed (1)
LOAD output (2)
Reference potential GND (11)
single signal (12)
Group signal /(13-14)
LINE-LOAD (1-2)
Group signal (13-14) per module ≤ 8 mΩ per pole
between main circuits (without busbar): 1,500 V
main circuit to auxiliary circuit:
between auxiliary circuits:
terminal blocks (pair)
cross section of
connecting cable
1.5-10 mm
0.25-4 mm
0.25-2.5 mm
0.25-1.5 mm
5 g (57-500 Hz) ± 0.38 mm (10-57 Hz),
to IEC 60068-2-6, test Fc,
10 frequency cycles/axis
25 g (11 ms)
11 ms half sine
96 hours at 5 % salt mist,
to IEC 60068-2-11, test Ka
240 hours at 95 % RH
to IEC 60068-2-78, test Cab
17plus
to IEC 60068-2-27, test Ea
Spring-loaded terminals for solid
conductors and stranded cables with
and without wire end ferrules. Please
use appropriate screw driver size (SD)
for removing the spring loaded terminals.
2
2
2
2
AC 250 V; 3 AC 433 V; DC 65 V
50 A
25 A
10 A
1 A (with ESX10: 0.5 A)
1 A (with ESX10: 0.5 A)
≤ 5 mΩ
+5 mΩ for each additional
module
screw driver stripped
3 (1.0 x 5.5)
1 (0.6 x 3.5)
1 (0,6 x 3.5)
0 (0.4 x 2.5)
1,500 V
1,500 V
approx. 85 g
approx. 30 g
length
12 mm
12 mm
10 mm
9 mm
5 - 33
5