TJA1080ATS/2/T,118 NXP Semiconductors, TJA1080ATS/2/T,118 Datasheet - Page 42

• Manufacturer Part Number: TJA1080ATS/2/T,118
• Description: IC TXRX FLEXRAY 20-SSOP
• Manufacturer: NXP Semiconductors

Specifications of TJA1080ATS/2/T,118

• Package / Case: 20-SSOP
• Applications: Automotive
• Interface: FlexRay
• Voltage - Supply: 4.75 V ~ 5.25 V
• Mounting Type: Surface Mount
• Mounting Style: SMD/SMT
• Number Of Transmitters: 1
• Power Supply Requirement: Single
• Package Type: SSOP
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 20
• Operating Temperature (max): 150C
• Operating Temperature (min): -40C
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-4813-2; 935288151118

NXP Semiconductors
TJA1080A
Product data sheet
13.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 15.
Table 16.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
≥ 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 15
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
All information provided in this document is subject to legal disclaimers.
16
17.
Rev. 5 — 24 February 2011
Package reflow temperature (°C)
Volume (mm
< 350
235
220
Package reflow temperature (°C)
Volume (mm
< 350
260
260
250
3
3
)
)
Figure
350 to 2000
260
250
245
17) than a SnPb process, thus
≥ 350
220
220
TJA1080A
FlexRay transceiver
245
> 2000
260
245
© NXP B.V. 2011. All rights reserved.
42 of 49