TJA1080ATS/2/T,112 NXP Semiconductors, TJA1080ATS/2/T,112 Datasheet - Page 18

IC TXRX FLEXRAY 20-SSOP

TJA1080ATS/2/T,112

Manufacturer Part Number
TJA1080ATS/2/T,112
Description
IC TXRX FLEXRAY 20-SSOP
Manufacturer
NXP Semiconductors
Datasheet

Specifications of TJA1080ATS/2/T,112

Applications
Automotive
Interface
Bus
Voltage - Supply
4.75 V ~ 5.25 V
Package / Case
20-SSOP
Mounting Type
Surface Mount
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
935288151112
NXP Semiconductors
TJA1080A
Product data sheet
6.3.2 Star-transmit mode
6.3.3 Star-receive mode
6.3.4 Star-standby mode
This mode is entered if one of the following events occur:
In Star-transmit mode the transmitter is enabled and the transceiver can transmit data on
the bus lines and on the TRXD lines. It transmits the data received on pins TXD or TRXD0
and TRXD1, depending on where activity is detected:
This mode is entered if the transceiver is in Star-idle mode and activity has been detected
on the bus lines.
In Star-receive mode the transceiver transmits data received on the bus via the TRXD0
and TRXD1 lines to other transceivers connected to the TRXD lines. The transmitter is
always disabled. RXD, which represents the data on the bus lines, is output at TRXD0 and
TRXD1.
This mode is entered if one of the following events occur:
In Star-standby mode the transceiver has entered a low power mode. In this mode the
current consumption is as low as possible to prevent discharging the capacitor at pin
V
If pins V
wake flag.
BUF
If the transceiver is in Star-idle mode and activity is detected on pin TXEN.
If the transceiver is in Star-idle mode and activity is detected on pins TRXD0 and
TRXD1.
If activity is detected on the TRXD lines, the transceiver transmits data from pins
TRXD0 and TRXD1 to the bus.
If activity is detected on the TXEN, the transceiver transmits data from pin TXD to the
bus and to the TRXD lines.
From Star-idle, Star-transmit or Star-receive modes if the wake flag is set and an
undervoltage on pin V
If the PWON flag is set.
.
IO
and V
All information provided in this document is subject to legal disclaimers.
BUF
are within their operating range, pins RXD and RXEN will indicate the
Rev. 5 — 24 February 2011
CC
is present for longer than t
to(uv)(VCC)
.
TJA1080A
FlexRay transceiver
© NXP B.V. 2011. All rights reserved.
18 of 49

Related parts for TJA1080ATS/2/T,112