TLE 8264-2E Infineon Technologies, TLE 8264-2E Datasheet - Page 48

• Manufacturer Part Number: TLE 8264-2E
• Manufacturer: Infineon Technologies

Specifications of TLE 8264-2E

• Packages: PG-DSO-36
• Transceiver: High Speed CAN ISO 11898 - 5 / 3 x LIN2.0 / J2602
• Voltage Regulator Output: 2 x 200 mA + 400 mA
• Watchdog: Standard and Window Watchdog
• Quiescent Current (max.): 28 ?A (typ) Sleep Mode (5V on)
• Standby Current: 58 ?A (typ) Stop Mode (5V on)

Figure 21
10.5.5
If the RxD signal is permanently recessive (for example, shorted to
the bus, the host microcontroller of this transceiver could start a message at any time, because the bus appears
to be idle. To prevent this node from disturbing communication on the bus, the SBC offers permanent RxD
recessive clamping. If the RxD signal is permanently recessive, the failure is diagnosed and the transmitter is
deactivated as long as the error occurs. The transmitter is reactivated only after a SPI command.
Data Sheet
V
GND
OFF
CC1µC
Overtemp
TxD
ON
Failure
V
Release of the Transmission after Overtemperature
Permanent RxD Recessive Clamping
LIN
LIN
D
Overtemperature
Recessive
48
V
cc1µC
), although there is a message sent on
Dominant
Rev. 1.0, 2009-03-31
LIN Transceiver
TLE8264-2E
R
t
t
t