PIC18F2480 MICROCHIP [Microchip Technology], PIC18F2480 Datasheet - Page 10

• Manufacturer Part Number: PIC18F2480
• Description: 28/40/44-Pin Enhanced Flash Microcontrollers with ECAN Technology, 10-Bit A/D and nanoWatt Technology
• Manufacturer: MICROCHIP [Microchip Technology]

PIC18F2480/2580/4480/4580
1.2
• Memory Endurance: The Enhanced Flash cells
• Self-programmability: These devices can write
• Extended Instruction Set: The
• Enhanced CCP module: In PWM mode, this
• Enhanced Addressable USART: This serial
• 10-bit A/D Converter: This module incorporates
• Extended Watchdog Timer (WDT): This
DS39637A-page 8
for both program memory and data EEPROM are
rated to last for many thousands of erase/write
cycles – up to 100,000 for program memory and
1,000,000 for EEPROM. Data retention without
refresh is conservatively estimated to be greater
than 40 years.
to their own program memory spaces under inter-
nal software control. By using a bootloader rou-
tine located in the protected Boot Block at the top
of program memory, it becomes possible to create
an application that can update itself in the field.
PIC18F2480/2580/4480/4580 family introduces
an optional extension to the PIC18 instruction set,
which adds 8 new instructions and an Indexed
Addressing mode. This extension, enabled as a
device configuration option, has been specifically
designed to optimize re-entrant application code
originally developed in high-level languages, such
as C.
module provides 1, 2 or 4 modulated outputs for
controlling half-bridge and full-bridge drivers.
Other features include Auto-Shutdown, for
disabling PWM outputs on interrupt or other select
conditions and Auto-Restart, to reactivate outputs
once the condition has cleared.
communication module is capable of standard
RS-232 operation and provides support for the LIN
bus protocol. Other enhancements include auto-
matic baud rate detection and a 16-bit Baud Rate
Generator for improved resolution. When the
microcontroller is using the internal oscillator
block, the EUSART provides stable operation for
applications that talk to the outside world without
using an external crystal (or its accompanying
power requirement).
programmable acquisition time, allowing for a
channel to be selected and a conversion to be
initiated without waiting for a sampling period and
thus, reduce code overhead.
enhanced version incorporates a 16-bit prescaler,
allowing a time-out range from 4 ms to over 131
seconds, that is stable across operating voltage
and temperature.
Other Special Features
Preliminary
1.3
Devices in the PIC18F2480/2580/4480/4580 family are
available in 28-pin (PIC18F2X80) and 40/44-pin
(PIC18F4X80) packages. Block diagrams for the two
groups are shown in Figure 1-1 and Figure 1-2.
The devices are differentiated from each other in six
ways:
1.
2.
3.
4.
5.
6.
All other features for devices in this family are identical.
These are summarized in Table 1-1.
The pinouts for all devices are listed in Table 1-2 and
Table 1-3.
Like all Microchip PIC18 devices, members of the
PIC18F2480/2580/4480/4580 family are available as
both standard and low-voltage devices. Standard
devices with Enhanced Flash memory, designated with
an “F” in the part number (such as PIC18F2580),
accommodate an operating V
Low-voltage parts, designated by “LF” (such as
PIC18LF2580), function over an extended V
of 2.0V to 5.5V.
Flash
PIC18FX480
PIC18FX580).
A/D channels (8 for PIC18F2X80 devices; 11 for
PIC18F4X80 devices).
I/O ports (3 bidirectional ports and 1 input only
port on PIC18F2X80 devices; 5 bidirectional
ports on PIC18F4X80 devices).
CCP and Enhanced CCP implementation
(PIC18F2X80 devices have 1 standard CCP
module;
standard CCP module and one ECCP module).
Parallel
PIC18F4X80 devices).
PIC18F4X80 devices provide two comparators.
Details on Individual Family
Members
program
PIC18F4X80
Slave
devices;
Port
 2004 Microchip Technology Inc.
memory
DD
devices
(present
range of 4.2V to 5.5V.
32 Kbytes
(16 Kbytes
have
only
DD
one
range
for
for
on