GS-BT2416C2_0709 STMICROELECTRONICS [STMicroelectronics], GS-BT2416C2_0709 Datasheet - Page 18

• Manufacturer Part Number: GS-BT2416C2_0709
• Description: Bluetooth class 2 module with embedded SPP SW
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

AT command
A.5
A.6
18/32
AT command reference
AT commands are used to configure the module and trigger operations. AT commands are
transmitted over the UART channel from the external MCU to the Bluetooth module. AT
commands have the following syntax:
Each line must be always terminated by the 0x0D 0x0A characters and only a single
command per line is allowed.
The response to an AT command can be OK if the command was successfully executed, or
ERROR if an error occurred and has the following syntax:
Some AT commands can generate events. Events are always reported as follows:
Each event is always bounded by the characters 0x0D 0x0A and can have zero or more
parameters. The command syntax is case insensitive.
AT
Test the UART communication channel to the Bluetooth module
AT + CMD = parameter0, parameter1, …\0x0D\0x0A
AT + CMD\0x0D\0x0A
\0x0D\0x0AOK\0x0D\0x0A
\0x0D\0x0AERROR\0x0D\0x0A
\0x0D\0x0A+EVENT: parameter0, …\0x0D\0x0A
Syntax: AT
Return value: OK
GS-BT2416C2.AT1