GS-BT2416C2_0709 STMICROELECTRONICS [STMicroelectronics], GS-BT2416C2_0709 Datasheet - Page 27

• Manufacturer Part Number: GS-BT2416C2_0709
• Description: Bluetooth class 2 module with embedded SPP SW
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

GS-BT2416C2.AT1
Appendix B
B.1
8.2
+BTSETTINGS
Outputs the current configuration parameters of the module.
+BTRPORT
The event is generated only in response to an AT+BTRPORTS command. A +BTRPORT
event is generated for each SPP service found on a remote device. So, for example, if a
remote device exposes two SPP ports, two different +BTRPORT events are generated.
Syntax: +BTSETTINGS: BdAddress, DeviceClass, “DeviceName”, “PinCode”,
ConnectableMode, DiscoverableMode, PairableMode, SecurityMode,
EncryptionMode
Parameters:
BdAddress: Bluetooth address of the local module. This value is specified as a 6-
byte hexadecimal value: i.e.
+BTSETTINGS=00230A01F0A5, …
DeviceClass: 24-bit integer value indicating the local device class. This value is
interpreted as an unsigned hexadecimal 24-bit value
DeviceName: A string representing the name of the local device. This string can
be long up to 200 characters.
PinCode: 4 to 16-byte string representing the module’s pin code
ConnectableMode: Indicates if the module cannot(=0) / can(=1) be contacted by
other Bluetooth devices
DiscoverableMode: Indicates if the module cannot(=0) / can(=1) be discovered by
other Bluetooth devices
PairableMode: Indicates if the module does not accept(=0) / accepts(=1) pairing
requests from a remote Bluetooth device
SecurityMode: Indicates if the module does not request(=0) / requests(=1)
authentication
EncryptionMode: Indicates if the module does not request(=0) / requests(=1)
encryption
Syntax: +BTRPORT: “ServiceName”, PortN
Parameters:
“ServiceName”: A string representing the name of the SPP service as it has been
registered on the remote Bluetooth device.
PortN: An integer value representing the port number of the remote SPP service.
AT event reference
AT event reference
27/32