GS-BT2416C2_0709 STMICROELECTRONICS [STMicroelectronics], GS-BT2416C2_0709 Datasheet - Page 23

• Manufacturer Part Number: GS-BT2416C2_0709
• Description: Bluetooth class 2 module with embedded SPP SW
• Manufacturer: STMICROELECTRONICS [STMicroelectronics]

GS-BT2416C2.AT1
A.20
A.21
A.22
AT+BTMACROSTART
Set the device in a programmable way. Every AT command coming after, with own
parameters, will not be executed but will be stored in the very insertion order.
This command will be available only if the device is set to COMMAND MODE.
To notice that starting a macro storing sequence will erase any previous present sequence.
AT+BTMACROSTOP
Stop the programmable status and store the commands sequence inserted so far into the
flash memory of the module. If the sequence is larger then memory block available an error
will be raised. The command will be available only if a device is set to COMMAND MODE
and only if it come after an AT+BTMACROSTART command.
Due to internal time needed to write a flash memory area a little
time delay is possible before any return value.
AT+BTMACROCLEAR
Erase any possible commands sequence present into the flash memory. This operation is
non-reversible.
Syntax: AT+BTMACROSTART
Return value: <OK, ERROR>
Syntax: AT+BTMACROSTOP
Return value: <OK, ERROR>
Syntax: AT+BTMACROCLEAR
Return value: <OK, ERROR>
AT command
23/32