MCIMX6Q7CVT08AC Freescale Semiconductor, MCIMX6Q7CVT08AC Datasheet - Page 11

• Manufacturer Part Number: MCIMX6Q7CVT08AC
• Description: Processors - Application Specialized i.MX6Q
• Manufacturer: Freescale Semiconductor
• Type: Multimedia Applicationsr

Specifications of MCIMX6Q7CVT08AC

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 800 MHz
• Data Ram Size: 16 KB
• Maximum Operating Temperature: + 105
• Mounting Style: SMD/SMT
• Package / Case: FCBGA
• Interface Type: I2C, I2S, UART, USB
• Memory Type: L1/L2 Cache, ROM, SRAM
• Minimum Operating Temperature: - 40 C
• Number Of Timers: 2

Freescale Semiconductor
Mnemonic
FlexCAN-1
FlexCAN-2
GPU2Dv2
GPIO-1
GPIO-2
GPIO-3
GPIO-4
GPIO-5
GPIO-6
GPIO-7
Block
GPMI
ESAI
GPT
Enhanced Serial
Audio Interface
Flexible Controller
Area Network
General Purpose I/O
Modules
General Purpose
Media Interface
General Purpose
Timer
Graphics Processing
Unit-2D, ver. 2
Block Name
i.MX 6Dual/6Quad Applications Processors for Industrial Products, Rev. 2
Table 2. i.MX 6Dual/6Quad Modules List (continued)
Connectivity
Peripherals
Connectivity
Peripherals
System
Control
Peripherals
Connectivity
Peripherals
Timer
Peripherals
Multimedia
Peripherals
Subsystem
The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial
port for serial communication with a variety of serial devices, including
industry-standard codecs, SPDIF transceivers, and other processors.
The ESAI consists of independent transmitter and receiver sections, each
section with its own clock generator. All serial transfers are synchronized
to a clock. Additional synchronization signals are used to delineate the
word frames. The normal mode of operation is used to transfer data at a
periodic rate, one word per period. The network mode is also intended for
periodic transfers; however, it supports up to 32 words (time slots) per
period. This mode can be used to build time division multiplexed (TDM)
networks. In contrast, the on-demand mode is intended for non-periodic
transfers of data and to transfer data serially at high speed when the data
becomes available.
The ESAI has 12 pins for data and clocking connection to external
devices.
The CAN protocol was primarily, but not only, designed to be used as a
vehicle serial data bus, meeting the specific requirements of this field:
real-time processing, reliable operation in the Electromagnetic
interference (EMI) environment of a vehicle, cost-effectiveness and
required bandwidth. The FlexCAN module is a full implementation of the
CAN protocol specification, Version 2.0 B, which supports both standard
and extended message frames.
Used for general purpose input/output to external devices. Each GPIO
module supports 32 bits of I/O.
The GPMI module supports up to 8x NAND devices. 40-bit ECC
encryption/decryption for NAND Flash controller (GPMI2). The GPMI
supports separate DMA channels per NAND device.
Each GPT is a 32-bit “free-running” or “set and forget” mode timer with
programmable prescaler and compare and capture register. A timer
counter value can be captured using an external event and can be
configured to trigger a capture event on either the leading or trailing
edges of an input pulse. When the timer is configured to operate in “set
and forget” mode, it is capable of providing precise interrupts at regular
intervals with minimal processor intervention. The counter has output
compare logic to provide the status and interrupt at comparison. This
timer can be configured to run either on an external clock or on an internal
clock.
The GPU2Dv2 provides hardware acceleration for 2D graphics
algorithms, such as Bit BLT, stretch BLT, and many other 2D functions.
Brief Description
Modules List
11