88-00143-85 Murata Wireless Solutions, 88-00143-85 Datasheet - Page 26

• Manufacturer Part Number: 88-00143-85
• Description: Zigbee / 802.15.4 Development Tools Hi Pwr Zigbee Module EVAL Kit
• Manufacturer: Murata Wireless Solutions

Specifications of 88-00143-85

• Rohs: yes
• Tool Is For Evaluation Of: SN3020
• Frequency: 2.45 GHz
• Interface Type: I2C, RS-232, SPI, UART, USB
• Operating Supply Voltage: 3 V
• Antenna Connector Type: Chip Antenna
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C

If this device is used in a product, the OEM has responsibility to verify compliance of the final
product to the EU standards. A Declaration of Conformity must be issued and kept on file as
described in Annex II of the Radio and Telecommunications Terminal Equipment Directive.
The ‘CE’ mark must be placed on the OEM product per the labeling requirements of the Directive.
Given that the operating frequency band is not harmonized by a few European countries, the
restriction or alert sign must be placed along side the ‘CE’ mark as shown below. As of the date of
this document, only France has a restriction. The restriction is that, if the radio is operated outdoors
in the 2450-2483.5 MHz band, the power must be limited to 10 mW instead of 100 mW. The OEM
must account for this and the product must have the alert mark. It does not require country
notifications, however.
12 Technical Support Contact
SyChip, Inc
2805 Dallas Parkway, Suite 400
Plano, TX 75093
USA
Tel: [phone]
Fax: [phone]
Note: SyChip, Inc is an operating unit within Murata Wireless Solutions
13 References
[1] IEEE Standard 802.15.4 – 2003 Wireless Medium Access Control (MAC) and Physical Layer
(PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-WPANs)
[2] Ember, “EmberZNet API Reference: For the EM35x SoC Platform”, 120-3022-000G, October
28 2010
SyChip/Murata Confidential
Page 26 of 26
SN3020 User Manual 1.1