M25P20-VMN6TPB NUMONYX, M25P20-VMN6TPB Datasheet - Page 35

• Manufacturer Part Number: M25P20-VMN6TPB
• Description: IC FLASH 2MBIT 75MHZ 8SOIC
• Manufacturer: NUMONYX
• Series: Forté™r

Specifications of M25P20-VMN6TPB

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 2M (256K x 8)
• Speed: 75MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 2.3 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (3.9mm Width)
• Package: 8SO N
• Cell Type: NOR
• Density: 2 Mb
• Architecture: Sectored
• Block Organization: Symmetrical
• Typical Operating Supply Voltage: 3.3 V
• Sector Size: 64KByte x 4
• Timing Type: Synchronous
• Interface Type: Serial-SPI
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: M25P20-VMN6TPBTR

8
9
Initial delivery state
The device is delivered with the memory array erased: all bits are set to 1 (each byte
contains FFh). The Status Register contains 00h (all Status Register bits are 0).
Maximum rating
Stressing the device above the rating listed in the Absolute Maximum Ratings" table may
cause permanent damage to the device. These are stress ratings only and operation of the
device at these or any other conditions above those indicated in the Operating sections of
this specification is not implied. Exposure to Absolute Maximum Rating conditions for
extended periods may affect device reliability. Refer also to the Numonyx SURE Program
and other relevant quality documents.
Table 9.
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the Numonyx
2. The minimum voltage may reach the value of -2 V for no more than 20 ns during transitions; The maximum
3. JEDEC Std JESD22-A114A (C1 = 100 pF, R1 = 1500 Ω, R2 = 500 Ω).
Symbol
ECOPACK® 7191395 specification, and the European directive on Restrictions on Hazardous Substances
(RoHS) 2002/95/EU.
voltage may reach the value of V
T
T
V
V
LEAD
V
STG
ESD
CC
IO
Absolute maximum ratings
Storage temperature
Lead temperature during soldering
Input and output voltage (with respect to Ground)
Supply voltage
Electrostatic Discharge voltage (Human Body model)
CC
+2 V for no more than 20 ns during transitions..
Parameter
(2)
(3)
–2000
Min.
–0.6
–0.6
–65
see
V
Max.
2000
150
CC
0.6
4.0
(1)
+
Unit
°C
°C
V
V
V
35/55