20-101-0303 Rabbit Semiconductor, 20-101-0303 Datasheet - Page 38

• Manufacturer Part Number: 20-101-0303
• Description: SMARTSCREEN OP7100 W/TOUCHSCREEN
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0303

• Display Type: STN - Super-Twisted Nematic
• Viewing Area: 121.00mm L x 91.00mm W
• Backlight: CCFL - White
• Dot Pitch: 0.36mm x 0.36mm
• Dot Pixels: 320 x 240 (QVGA)
• Interface: Serial
• Product: Prototyping Accessories
• Processor Type: Z180
• Sram: 128 KB
• Flash: 512 KB
• Number Of I/os: 16
• Backup Battery: 3 V Lithium Coin Type
• Operating Voltage: 10 V to 30 V
• Power Consumption: 4.5 W
• Interface Type: Ethernet
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Display Mode: -
• Dot Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 20-101-0303; 20-101-303; 20-101-303; 316-1175

RS-232 Communication
Figure 3-17 shows the RS-232 signals on header J8 and header J10 (the
DE-9 connector).
Rabbit Semiconductor has RS-232 support libraries for Z180 Ports 0 and
1. The following functional support for serial communication is included.
•
•
•
•
Receive and Transmit Buffers
Serial communication is easier with a background interrupt routine that
updates receive and transmit buffers. Every time a port receives a charac-
ter, the interrupt routine places it into the receive buffer. A program can
read the data one character at a time or as a string of characters terminated
by a special character.
38 Hardware
Initializing the serial ports.
Monitoring and reading a circular receive buffer.
Monitoring and writing to a circular transmit buffer.
CTS (clear to send) and RTS (request to send) control for Z180 Port 0.
Pin 9 on header J10, the DE-9 connector, may be configured to
carry DCIN, the input voltage, by adding a 0 Ω resistor at R32.
Be careful when connecting other devices to header J10 when
R32 is installed since not all devices can handle DCIN. For
example, PCs are limited to 12 V.
The availability of DCIN on pin 9 of header J7 allows a DC
power supply to be made available to the device being
connected to the OP7100.
Figure 3-17. RS-232 Signals
OP7100