ZUP20-10/U TDK Corporation, ZUP20-10/U Datasheet - Page 54

• Manufacturer Part Number: ZUP20-10/U
• Description: PWR SUP BENCH PROG 0-20V 200W
• Manufacturer: TDK Corporation
• Series: ZUPr
• Type: Programmabler

Specifications of ZUP20-10/U

• Load Regulation: 0.01%
• Voltage - Output: 0 ~ 20V
• Number Of Outputs: 1
• Power (watts): 200W
• Applications: Commercial
• Power Supply Type: Switching (Closed Frame)
• Voltage - Input: 85 ~ 265VAC
• Mounting Type: Chassis Mount
• 1st Output: 0 ~ 20 VDC @ 10A
• Size / Dimension: 13.78" L x 4.88" W x 2.76" H (350mm x 124mm x 70mm)
• Power (watts) - Rated: 200W
• Operating Temperature: 0°C ~ 50°C
• Efficiency: 78%
• Approvals: CE, EN, UL
• Line Regulation: 0.01%
• Power Supply Output Type: Variable
• No. Of Outputs: 1
• Output Voltage: 20V
• Output Current: 10A
• Power Rating: 200W
• Input Voltage: 85V AC To 265V AC
• Length: 350mm
• Width: 70mm
• Accuracy: 0.02% + 12 mV
• Brand/series: ZUP
• Current, Output: 10 A
• Display Type: Digital Meter
• Power, Output: 200 W
• Power, Rating: 200 W (Max.)
• Regulation, Line: 0.01% + 2 mA⁄1 mV + 0.005%
• Regulation, Load: 0.01% + 5 mA⁄2 mV + 0.005%
• Standards: UL Listed, CE Marked
• Temperature Coefficient: 30 ppm⁄°C (CV)⁄100 ppm⁄°C (CC)
• Temperature, Operating, Maximum: 50 °C
• Temperature, Operating, Minimum: 0 °C
• Voltage, Input: 85-265 VAC
• Voltage, Noise: 50 mV @ 20 MHz BW
• Voltage, Output: 20 VDC
• Voltage, Ripple: 5 mV @ 5 Hz to 1 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• 3rd Output: -
• 2nd Output: -
• 4th Output: -
• Lead Free Status / Rohs Status: RoHS Compliant part
• Other names: 285-1673; Q1142280; ZUP20-10/U; ZUP2010/U

1. Equipment :
2. PC Set Up :
3. ZUP Set Up
4. Communication
5.6.4. COMMUNICATION TEST SET UP
ATTENTION:
test
PC with Windows HyperTerminal Private Edition software installed , ZUP Power
Supply , RS232 cable (NC401 when the PC uses DB-9 or NC403 when the PC uses
DB-25 connector).
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3.1
3.2
3.3
4.1
4.2
output current.
Do not use Backspace, Enter, Ctrl or Alt keys.
If an error was made during writing , press “;” and write again the command.
The ZUP output should turn on and display will show the output voltage and actual
Open Hyper Terminal Private Edition...... New Connection
Enter a name
Connect to...................... Direct to Com1 or Com2
Set the Port Properties as follows:
Open Properties in the program:
Setting: ASCII Set Up
Press
Connect ZUP Power Supply to the PC using RS232 cable (NC401 or NC403)
Model identification test:
Command test:
Set via the front panel: Baud Rate 9600, RS232/RS485 to RS232, address:01
Set Rem/Local to Rem (Rem LED illuminates)
select Echo characters locally
Caps Lock
PC: write
ZUP response:
for capital letters
PC: write:
Bits per second...................... 9600
Data bits...................................... 8
Parity.................................... None
Stop bits....................................... 1
Flow control..................... Xon/Xoff
File:............... Properties
48
:OUT1; :VOLn; :CURn;
: ADR01;:MDL?;
Nemic-Lambda<XXV-YYA>
(for n refer 5.5.3)