MPC8315E-RDBA Freescale Semiconductor, MPC8315E-RDBA Datasheet - Page 6

• Manufacturer Part Number: MPC8315E-RDBA
• Description: BOARD MPU 8315 POWERQUICC II
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC II™ PROr
• Type: MPUr

Specifications of MPC8315E-RDBA

• Contents: Board
• Processor To Be Evaluated: MPC8315E
• Data Bus Width: 32 bit
• Interface Type: Ethernet, I2C, SPI, UART
• Operating Supply Voltage: 1.8 V
• For Use With/related Products: MPC8315E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MPC8315E Features
2.10
The eTSECs include the following features:
2.11
The integrated programmable interrupt controller (IPIC) provides a flexible solution for general-purpose
interrupt control. The IPIC programming model is compatible with the MPC8260 interrupt controller and
supports external and internal discrete interrupt sources. Interrupts can also be redirected to an external
interrupt controller.
2.12
The MPC8315E supports a range of power management states that significantly lower power consumption
under the control of the power management controller. The PMC includes the following features:
6
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ATAPI 6+
Spread spectrum clocking on receive
Asynchronous notification
Hot plug including asynchronous signal recovery
Link power management
Native command queuing
Staggered spin-up and port multiplier support
SATA 1.5 and 3.0 Gbps operation
Interrupt driven
Power management support
Error handling and diagnostic features
— Far end/near end loopback
— Failed CRC error reporting
— Increased ALIGN insertion rates
— Scrambling and CONT override
Two SGMII/RGMII/MII/RMII/RTBI interfaces
Two controllers designed to comply with IEEE Std 802.3™, IEEE 802.3u™, IEEE 802.3x™,
IEEE 802.3z™, IEEE 802.3au™, IEEE 802.3ab™, and IEEE Std 1588™
Support for Wake-on-Magic Packet™, a method to bring the device from standby to full operating
mode
MII management interface for external PHY control and status.
Provides power management when the device is used in both PCI host and agent modes
PCI Power Management 1.2 D0, D1, D2, D3hot, and D3cold states
PME generation in PCI agent mode, PME detection in PCI host mode
Dual Enhanced Three-Speed Ethernet Controllers (eTSECs)
Integrated Programmable Interrupt Controller (IPIC)
Power Management Controller (PMC)
MPC8315E PowerQUICC
™
II Pro Processor Hardware Specifications, Rev. 0
Freescale Semiconductor