C8051F540DK Silicon Laboratories Inc, C8051F540DK Datasheet - Page 7

• Manufacturer Part Number: C8051F540DK
• Description: KIT DEVELOPMENT FOR C8051F540
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F540DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F54x
• Processor Series: C8051F54x
• Interface Type: USB
• Operating Supply Voltage: 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: C8051F54x
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1669

7. Target Board
The C8051F540 Development Kit includes a target board with a C8051F540 (Side A) and C8051F542 (Side B)
device pre-installed for evaluation and preliminary software development. Numerous input/output (I/O) connections
are provided to facilitate prototyping using the target board. Refer to Figure 3 for the locations of the various I/O
connectors. Figure 4 on page 9 shows the factory default shorting block positions. A summary of the signal names
and headers is provided in Table 9 on page 15.
P4
J18
P1
P5
TB1
J1-J3
J8
J9, J10
J13
J15
J16
J17
J20
P2
TB3
J4
J5-7
J11
J12
J19
P3
Header to choose between +5V from Debug Adapter (P2) or +5V from on-board regulator (U4)
Connect V_HIGH node from TB1 LIN header to +5V regulator input for board power
Power connector (accepts input from 7 to 15 VDC unregulated power adapter)
USB connector (connects to PC for serial communication)
Shared LIN Connector for Side A and B MCUs for external nodes
Side A: Port 0 through Port 2 headers
Side A: Connects +5V net to VIO and VREGIN of the MCU
Side A: External crystal enable connectors
Side A: Connects decoupling capacitors C28 and C29 for MCU VREF (P0.0)
Side A: Connects VIO to VIO_A_SRC which powers the R22 potentiometer, the RST_A
Side A: Connects P1.3_A LED and P1.4_A Switch to MCU port pins
Side A: Connects MCU to two separate transceivers (UART(U3), and LIN(T2))
Side A: Connects R27 potentiometer to port pin 1.2
Side A: DEBUG connector for Debug Adapter interface
Side A: Power supply terminal block
Side B: Connects +5V net to VIO and VREGIN of the MCU
Side B: Port 0 through Port 2 headers
Side B: Connects P1.3_B LED and P1.4_B Switch to MCU port pins
Side B: Connects MCU to LIN transceiver (T1)
Side B: Connects decoupling capacitors C41 and C42 for MCU VREF (P0.0)
Side B: DEBUG connector for Debug Adapter interface
pin pull-up, and P1.4_A Switch pull-up.
Rev. 0.1
C8051F540DK
7