FLUKE-FP PLUS Fluke Electronics, FLUKE-FP PLUS Datasheet - Page 14

• Manufacturer Part Number: FLUKE-FP PLUS
• Description: THERM FOODPRO PLUS FOOD SAFETY
• Manufacturer: Fluke Electronics
• Series: FoodPro Plusr
• Type: Handheld, Gunr

Specifications of FLUKE-FP PLUS

• Temperature Range: -40 ~ 392°F (-40 ~ 200°C)
• Temperature Display: C°/F°
• Display Type: LCD
• Input Type: Infrared; Probe
• Features: Backlight, Hold, IP54 Sealed, LED Sight, MAX Reading; Timer
• Probe Type: RTD
• Battery Type: 9 Volt
• Includes: Pouch
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 2477950

FoodPro Plus
Users Manual
contents of delicases, chilled salads and desserts, holding ovens,
rotisseries, etc.
Field Verification of Accuracy
Infrared (IRT) and Probe channels (RTD)
Follow the steps below to verify the accuracy of your food safety
thermometer. The 0 C (32 F) “stirred ice bath” is the recommended
verification reference point. Since it is more difficult to measure the surface
of hot water, the hot verification should be used only as a general accuracy
check of the IRT channel.
Cold Temperature Verification Check
10
If any questionable temperatures are indicated or if temperature
readings are within ±1 °C (±2 °F) of the HACCP “Danger Zone”
boundary, use the probe to check internal temperatures.
1.
2.
3.
Fill a large styrofoam cup halfway to the surface with ice cubes.
Add cold water to just below the rim of the cup.
Immerse the tip of a known calibrated probe thermometer
(reference probe) into the water and stir the mixture with the
probe for one minute, or until the probe temperature stabilizes.
Continue stirring the water with a straw or swizzle stick while
taking simultaneous temperature measurements with the
reference probe and the IR thermometer. The unit should be
held within 3 inches of the surface of the water (Figure 8). To
insure measurement accuracy the probe tip must be immersed
to a minimum depth of 12 mm (1/2 ").
Note