FLUKE-FP PLUS Fluke Electronics, FLUKE-FP PLUS Datasheet - Page 8

• Manufacturer Part Number: FLUKE-FP PLUS
• Description: THERM FOODPRO PLUS FOOD SAFETY
• Manufacturer: Fluke Electronics
• Series: FoodPro Plusr
• Type: Handheld, Gunr

Specifications of FLUKE-FP PLUS

• Temperature Range: -40 ~ 392°F (-40 ~ 200°C)
• Temperature Display: C°/F°
• Display Type: LCD
• Input Type: Infrared; Probe
• Features: Backlight, Hold, IP54 Sealed, LED Sight, MAX Reading; Timer
• Probe Type: RTD
• Battery Type: 9 Volt
• Includes: Pouch
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 2477950

FoodPro Plus
Users Manual
Proper Application and Operation
Before You Start
First time users should reference “Battery Insertion Replacement” before
using the unit.
Noncontact (Infrared) Mode
Pressing and holding the ON button starts the food safety thermometer in
noncontact (infrared) measurement mode. The measurement will continue
as long as the ON button is depressed, indicated by the blinking “SCAN”.
When the button is released, “HOLD” appears on the display and the last
measurement remains visible for 7 seconds before the display goes blank.
The unit will display the temperature of an area highlighted by the target
illuminator. The maximum reading is indicated in the lower portion of the
display (Figure 1).
4
Certifications
Warranty
Accessories
[1] Calibration Geometry: >22 C 144 mm source @ 200 mm (1.45:1)
E=0.97DD <25 C 140 mm source @ 100 mm (0.7:1) E=1.00 BB.
Table 1. Specifications and Features (cont.)
Maximum
Reading
Current
Figure 1. Noncontact (infrared) Mode
Value
On/Off
Other
CE, NSF, CMC
2 years
Nylon Carrying Pouch, QuickStart
Guide, and Battery
ebq03.eps