71922-110LF FCI, 71922-110LF Datasheet - Page 13

• Manufacturer Part Number: 71922-110LF
• Description: CONN HEADER 10POS DUAL R/A PCB
• Manufacturer: FCI
• Series: Quickie™, Basics+r
• Type: PCB Plugr

Specifications of 71922-110LF

• Contact Type: Male Pin
• Connector Type: Header, Shrouded
• Number Of Positions: 10
• Number Of Positions Loaded: All
• Pitch: 0.100" (2.54mm)
• Number Of Rows: 2
• Row Spacing: 0.100" (2.54mm)
• Contact Mating Length: 0.228" (5.80mm)
• Mounting Type: Through Hole, Right Angle
• Termination: Solder
• Fastening Type: Latch Lock/Eject Hooks
• Contact Finish: Gold, GXT™
• Contact Finish Thickness: 30µin (0.76µm)
• Color: Gray
• Product Type: Headers - Latch / Eject
• Number Of Positions / Contacts: 10
• Mounting Style: Through Hole
• Mounting Angle: Right
• Termination Style: Solder
• Contact Plating: Gold
• Agency Approvals: CSA, UL
• Angle: Right
• Brand/series: Quickie®
• Current, Rating: 3 A
• Flammability Rating: UL94V-0
• Length, Overall: 44.7 mm
• Length, Pin: 0.114 "
• Material, Contact: Phosphor Bronze
• Material, Housing: Thermoplastic
• Mounting Hole Size: 1.02, 2.8 "
• Number Of Contacts: 10
• Pin Spacing: 2.54 mm
• Special Features: Eject Latch
• Temperature, Operating: -65 to +125 °C
• Voltage, Rating: 1500 VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 609-1760

TITLE
Quickie™ Connector System
Copyright
Form E-3334
Rev E
FCI
3.7.5
3.7.6
3.7.7
Vibration. There shall be no evidence of physical or mechanical damage when the mated
connectors are subjected to prolonged mechanical vibration; during the vibration along
each axis, the contacts shall evidence no discontinuity greater than l microsecond. At the
completion of the test, the individual contact separation force shall be not less than
specified in paragraph 3.6.4 and the contact resistance shall not exceed 15 milliohms (see
paragraph 3.5.2). The test shall be in accordance with MIL-STD-202, Method 204; the
following details shall apply:
(a) Test Condition - B (+15G, 10 to 2,000 Hz)
(b) Test Duration - 4 hours along each of three orthogonal axes (12 hours total)
(c) Mounting - see Figure 5
* The high temperature limit for polyester is +l50 o C; however, the PVC insulation of the
cable restricts the assembly to +l05 o C.
Hydrogen Sulfide (H 2 S) Exposure. After exposure of the mated connectors to an H 2 S
atmosphere, the low level circuit resistance shall not exceed l5 milliohms (see paragraph
3.5.3). The following details shall apply:
(a) Test Medium - solution of 120 grams of Na 2 S.9H 2 0 in 500 ml of distilled water, with
(b) Test Temperature - 40 o C
(c) Test Duration - 48 hours in a sealed 9000 cc glass container.
Salt Spray. After exposure of the mated connectors to a salt fog atmosphere, the low
level circuit resistance and contact resistance shall not exceed 15 milliohms (see
paragraphs 3.5.3 and 3.5.2, respectively) when measured in that order. The test all be in
accordance with MIL-STD-202, Method l0l; the following details shall apply:
(a) Salt Solution - 5 percent by weight
(b) Test Condition - B (48 hours)
14 grams of K 2 HPO 4 added immediately prior to test.
TYPE
PRODUCT SPECIFICATION
PDM: Rev:F
STATUS:
NUMBER
PAGE
AUTHORIZED BY
CLASSIFICATION
M.Barrios
13 of 20
Released
BUS-12-082
UNRESTRICTED
Printed: Apr 13, 2007
REVISION
DATE
31 Jul 06
F
GS-01-001
.