PIC16LF723-I/ML Microchip Technology, PIC16LF723-I/ML Datasheet - Page 85

• Manufacturer Part Number: PIC16LF723-I/ML
• Description: IC PIC MCU FLASH 8KX14 28-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF723-I/ML

• Core Size: 8-Bit
• Program Memory Size: 7KB (4K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 25
• Program Memory Type: FLASH
• Ram Size: 192 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 11x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Controller Family/series: PIC16LF
• Ram Memory Size: 192Byte
• No. Of Timers: 3
• No. Of Pwm Channels: 2
• Digital Ic Case Style: QFN
• Supply Voltage Range: 1.8V To
• Rohs Compliant: Yes
• Core: PIC
• Processor Series: PIC16LF
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 32 KHz
• Data Ram Size: 192 B
• On-chip Adc: Yes
• Number Of Programmable I/os: 25
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Mounting Style: SMD/SMT
• A/d Bit Size: 8 bit
• A/d Channels Available: 11
• Height: 0.88 mm
• Interface Type: I2C, SCI, SPI
• Length: 6 mm
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.3 V
• Width: 6 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 6-15:
REGISTER 6-16:
© 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-4
bit 3-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-4
bit 3
bit 2-0
Note 1:
U-0
U-0
—
—
RE<2:0> are not implemented on the PIC16F722/723/726/PIC16LF722/723/726. Read as ‘0’.
TRISE<2:0> are not implemented on the PIC16F722/723/726/PIC16LF722/723/726. Read as ‘0’.
Unimplemented: Read as ‘0’
RE<3:0>: PORTE I/O Pin bits
1 = Port pin is > V
0 = Port pin is < V
Unimplemented: Read as ‘0’
TRISE3: RE3 Port Tri-state Control bit
This bit is always ‘1’ as RE3 is an input only
TRISE<2:0>: RE<2:0> Tri-State Control bits
1 = PORTE pin configured as an input (tri-stated)
0 = PORTE pin configured as an output
U-0
U-0
—
—
PORTE: PORTE REGISTER
TRISE: PORTE TRI-STATE REGISTER
W = Writable bit
‘1’ = Bit is set
W = Writable bit
‘1’ = Bit is set
IH
IL
U-0
U-0
—
—
(1)
U-0
U-0
—
—
PIC16F72X/PIC16LF72X
U = Unimplemented bit, read as ‘0’
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
‘0’ = Bit is cleared
(1)
TRISE3
RE3
R-1
R-x
TRISE2
RE2
R/W-x
R/W-1
(1)
(1)
x = Bit is unknown
x = Bit is unknown
TRISE1
RE1
R/W-x
R/W-1
(1)
(1)
DS41341E-page 85
TRISE0
RE0
R/W-1
R/W-x
(1)
bit 0
bit 0
(1)