PIC18F4423-I/PT Microchip Technology, PIC18F4423-I/PT Datasheet - Page 3

• Manufacturer Part Number: PIC18F4423-I/PT
• Description: IC PIC MCU FLASH 8KX16 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F4423-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 16KB (8K x 16)
• Package / Case: 44-TQFP, 44-VQFP
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 768 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 768 B
• Interface Type: EUSART/I2C/MSSP/SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 4
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, DM163022, DV164136
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 13-ch x 12-bit
• Controller Family/series: PIC18
• No. Of I/o's: 36
• Eeprom Memory Size: 256Byte
• Ram Memory Size: 768Byte
• Cpu Speed: 40MHz
• Rohs Compliant: Yes
• Package: 44TQFP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 444-1001 - DEMO BOARD FOR PICMICRO MCUAC164020 - MODULE SKT PROMATEII 44TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5. Module: Enhanced Universal
REGISTER 18-3:
© 2007 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
ABDOVF
One bit has been added to the BAUDCON register
and one bit has been renamed. The added bit is
RXDTP and is in the location, BAUDCON<5>. The
renamed bit is the TXCKP bit (BAUDCON<4>),
which had been named SCKP.
The
(BAUDCON<5>) bits enable the TX and RX
signals to be inverted (polarity reversed).
R/W-0
TXCKP
Synchronous Receiver
Transmitter (EUSART)
ABDOVF: Auto-Baud Acquisition Rollover Status bit
1 = A BRG rollover has occurred during Auto-Baud Rate Detect mode (must be cleared in software)
0 = No BRG rollover has occurred
RCIDL: Receive Operation Idle Status bit
1 = Receive operation is Idle
0 = Receive operation is Active
RXDTP: Receive Data Polarity Select bit
Asynchronous mode:
1 = Receive data (RX) is inverted. Idle state is a low level.
0 = No inversion of receive data (RX). Idle state is a high level.
Synchronous mode:
1 = Data (DT) is inverted. Idle state is a low level.
0 = No inversion of data (DT). Idle state is a high level.
TXCKP: Transmit/Clock Polarity Select bit
Asynchronous mode:
1 = Transmit data (TX) is inverted. Idle state is a low level.
0 = No inversion of transmit data (TX). Idle state is a high level.
Synchronous mode:
1 = Idle state for clock (CK) is a high level
0 = Idle state for clock (CK) is a low level
BRG16: 16-bit Baud Rate Register Enable bit
1 = 16-bit Baud Rate Generator – SPBRGH and SPBRG
0 = 8-bit Baud Rate Generator – SPBRG only (Compatible mode); SPBRGH value ignored
Unimplemented: Read as ‘0’
WUE: Wake-up Enable bit
Asynchronous mode:
1 = EUSART will continue to sample the RX pin with the interrupt generated on the falling edge; bit
0 = RX pin is not monitored or rising edge detected
Synchronous mode:
Unused in this mode.
ABDEN: Auto-Baud Detect Enable bit
Asynchronous mode:
1 = Enable baud rate measurement on the next character. Requires reception of a Sync field (55h);
0 = Baud rate measurement disabled or completed
Synchronous mode:
Unused in this mode.
RCIDL
(BAUDCON<4>)
R-1
cleared in hardware on following rising edge
cleared in hardware upon completion.
BAUDCON: BAUD RATE CONTROL REGISTER
W = Writable bit
‘1’ = Bit is set
RXDTP
R/W-0
and
PIC18F2423/2523/4423/4523
RXDTP
TXCKP
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
BRG16
R/W-0
Register 18-3, on page 208, will be changed as
shown.
Work around
None required.
Date Codes that pertain to this issue:
All engineering and production devices.
U-0
—
x = Bit is unknown
R/W-0
WUE
DS80289E-page 3
ABDEN
R/W-0
bit 0