PIC16F84A-20I/SS Microchip Technology, PIC16F84A-20I/SS Datasheet - Page 311

• Manufacturer Part Number: PIC16F84A-20I/SS
• Description: IC MCU FLASH 1KX14 EE 20SSOP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F84A-20I/SS

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 20MHz
• Peripherals: POR, WDT
• Number Of I /o: 13
• Program Memory Type: FLASH
• Eeprom Size: 64 x 8
• Ram Size: 68 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SSOP
• Controller Family/series: PIC16F
• No. Of I/o's: 13
• Eeprom Memory Size: 64Byte
• Ram Memory Size: 68Byte
• Cpu Speed: 20MHz
• No. Of Timers: 1
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 68 B
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 8
• Operating Supply Voltage: 2 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• Data Rom Size: 64 B
• Height: 1.75 mm
• Length: 7.2 mm
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4 V
• Width: 5.3 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT20SS1-1 - SOCKET TRANSITION 20DIP 20SSOPI3-DB16F84A - BOARD DAUGHTER ICEPIC3AC164307 - MODULE SKT FOR PM3 28SSOPAC164018 - MODULE SKT PROMATEII 20SSOP
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

17.4.10.1 WCOL Status Flag
1997 Microchip Technology Inc.
If the user writes the SSPBUF when a Repeated Start sequence is in progress, then WCOL is
set and the contents of the buffer are unchanged (the write doesn’t occur).
Figure 17-22: Repeat Start Condition Waveform
Note:
Falling edge of ninth clock
SDA
SCL
Because queueing of events is not allowed, writing of the lower 5 bits of SSPCON2
is disabled until the Repeated Start condition is complete.
End of Xmit
Write to SSPCON2
occurs here.
SDA = 1,
SCL(no change)
Preliminary
T
SDA = 1,
SCL = 1
BRG
T
BRG
Section 17. MSSP
Sr = Repeated Start
T
BRG
At completion of start bit,
hardware clear RSEN bit
Set S (SSPSTAT<3>)
and set SSPIF
Write to SSPBUF occurs here.
T
BRG
1st Bit
T
BRG
DS31017A-page 17-35
17