C8051F061-GQ Silicon Laboratories Inc, C8051F061-GQ Datasheet - Page 28

• Manufacturer Part Number: C8051F061-GQ
• Description: IC 8051 MCU 64K FLASH 64TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F061-GQ

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 64-TQFP, 64-VQFP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: CAN, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 24
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b, 8x10b; D/A 2x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F0x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 4.25 KB
• Interface Type: CAN/I2C/SMBus/SPI/UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F060DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 2-ch x 16-bit
• On-chip Dac: 2-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1215

breakpoints, watchpoints, a stack monitor, and single stepping. No additional target RAM, program mem-
ory, timers, or communications channels are required. All the digital and analog peripherals are functional
and work correctly while debugging. All the peripherals (except for the ADCs and SMBus) are stalled when
the MCU is halted, during single stepping, or at a breakpoint in order to keep them synchronized with
instruction execution.
The C8051F060DK development kit provides all the hardware and software necessary to develop applica-
tion code and perform in-circuit debugging with the C8051F06x MCUs. The kit includes a Windows (95 or
later) development environment, a serial adapter for connecting to the JTAG port, and a target application
board with a C8051F060 MCU installed. All of the necessary communication cables and a wall-mount
power supply are also supplied with the development kit. Silicon Labs’ debug environment is a vastly supe-
rior configuration for developing and debugging embedded applications compared to standard MCU emu-
lators, which use on-board "ICE Chips" and target cables and require the MCU in the application board to
be socketed. Silicon Labs' debug environment both increases ease of use and preserves the performance
of the precision, on-chip analog peripherals.
C8051F060/1/2/3/4/5/6/7
1.3.
The C8051F06x family has on-chip JTAG boundary scan and debug circuitry that provides non-intrusive,
full speed, in-circuit debugging using the production part installed in the end application, via the four-pin
JTAG interface. The JTAG port is fully compliant to IEEE 1149.1, providing full boundary scan for test and
manufacturing purposes.
Silicon Laboratories' debugging system supports inspection and modification of memory and registers,
28
JTAG Debug and Boundary Scan
WINDOWS 95 OR LATER
Figure 1.8. Development/In-System Debug Diagram
Development Environment
Silicon Labs Integrated
Adapter
Serial
Rev. 1.2
JTAG (x4), VDD, GND
TARGET PCB
C8051
F060