MC56F8355VFGE Freescale Semiconductor, MC56F8355VFGE Datasheet - Page 2

• Manufacturer Part Number: MC56F8355VFGE
• Description: IC DSP 16BIT 60MHZ 128-LQFP
• Manufacturer: Freescale Semiconductor
• Series: 56F8xxxr

Specifications of MC56F8355VFGE

• Core Processor: 56800
• Core Size: 16-Bit
• Speed: 60MHz
• Connectivity: CAN, EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 49
• Program Memory Size: 264KB (132K x 16)
• Program Memory Type: FLASH
• Ram Size: 10K x 16
• Voltage - Supply (vcc/vdd): 2.25 V ~ 3.6 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 105°C
• Package / Case: 128-LQFP
• Data Bus Width: 16 bit
• Processor Series: MC56F83xx
• Core: 56800E
• Numeric And Arithmetic Format: Fixed-Point
• Device Million Instructions Per Second: 60 MIPs
• Maximum Clock Frequency: 60 MHz
• Number Of Programmable I/os: 49
• Data Ram Size: 20 KB
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Interface Type: SCI, SPI, CAN
• Minimum Operating Temperature: - 40 C
• For Use With: MC56F8367EVME - EVAL BOARD FOR MC56F83X
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Please see http://www.freescale.com for the most current data sheet revision.
2
Rev 0.0
Rev 1.0
Rev 2.0
Rev 3.0
Rev 4.0
Rev 5.0
Rev 6.0
Rev 7.0
Rev 8.0
Rev 9.0
Rev 10.0
Rev 11.0
Rev. 12
Version History
Initial release
Fixed typos in Section 1.1.3; Replace any reference to Flash Interface Unit with Flash
Memory Module; added note to Vcap pin in
unneccessary notes in
ADC calibration information to
Corrected 2.2 F to 0.1 F low ESR capacitor in
correct parameters for the 128 package pinout. Corrected (fout/2) with (fout) in
Corrected pinout labels in
Adding/clarifing notes to
other Program Flash modes, clarification to
(pullup enabled) numbers in
Table
Correcting
Added 56F8155 information; edited to indicate differences in 56F8355 and 56F8155. Refor-
matted for Freescale look and feel. Updated Temperature Sensor and ADC tables, then
updated balance of electrical tables for consistency throughout the family. Clarified I/O power
description in
Added output voltage maximum value and note to clarify in
life expectancy note, since life expectancy is dependent on customer usage and must be
determined by reliability engineering. Clarified value and unit measure for Maximum allowed
P
Table
Updated
Deleted RSTO from Pin Group 2 (listed after
Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial)
in
Added information/corrected state during reset in
crystal frequency for PLL in
Replaced “Tri-stated” with an explanation in State During Reset column in
Corrected bootflash memory map layout in
• Added the following note to the description of the TMS signal in
Note:
• Added the following note to the description of the TRST signal in
Note:
debugging environment, TRST may be tied to V
D
Table
in
Table
10-1.
10-4. Added new RoHS-compliant orderable part numbers in
Always tie the TMS pin to V
For normal operation, connect TRST directly to V
10-4. Added RoHS-compliance and “pb-free” language to back cover.
Table 10-23
Table 4-6
10-3. Corrected note about average value for Flash Data Retention in
Document Revision History
Table
56F8355 Technical Data, Rev. 17
2-2, added note to
Address locations.
to reflect new value for maximum Uncalibrated Gain Error
Table
Table 4-4
Figure
Table 10-14
Table
10-12; corrected temperature range in
Table 10-23
11-1.
Description of Change
DD
10-5. Removed text and Table 10-2; replaced with note to
to help clarify independent program flash blocks and
through a 2.2K resistor.
Table 10-7
by increasing maximum value to 8.4MHz.
Table 4-4
Table
and new graphs in
Table
SS
Table
through a 1K resistor.
Table
Table
10-22, corrected Digital Input Current Low
2-2; corrected
and clarified
10-1). Deleted formula for Max Ambient
to 16KB.
SS
2-2. Replaced
. If the design is to be used in a
2-2. Clarified external reference
Table
Figure 10-22
Section
Table
10-1; also removed overall
Table
Table
Table
Table
Table 10-16
Freescale Semiconductor
4-4, removed
12.3.
2-2:
2-2:
Table
13-1.
10-14; added
Table
2-2.
with
Preliminary
10-14.