PIC32MX340F128H-80I/MR Microchip Technology, PIC32MX340F128H-80I/MR Datasheet - Page 85

• Manufacturer Part Number: PIC32MX340F128H-80I/MR
• Description: IC MCU 32BIT 128KB FLASH 64QFN
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX340F128H-80I/MR

• Core Size: 32-Bit
• Program Memory Size: 128KB (128K x 8)
• Core Processor: MIPS32® M4K™
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Controller Family/series: PIC32
• No. Of I/o's: 53
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 6
• No. Of Pwm Channels: 5
• Embedded Interface Type: EUSART, I2C, PSP, SPI
• Processor Series: PIC32MX3xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: EUART, I2C, SPI
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320001, DM320002, MA320001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1000 - PIC32 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

5.0
© 2010 Microchip Technology Inc.
Note 1: This data sheet summarizes the features
2: Some registers and associated bits
FLASH PROGRAM MEMORY
of the PIC32MX3XX/4XX family of
devices. It is not intended to be a compre-
hensive reference source. To comple-
ment the information in this data sheet,
refer to Section 5. “Flash Program
Memory” (DS61121) of the “PIC32MX
Family Reference Manual”, which is avail-
able from the Microchip web site
(www.microchip.com/PIC32).
described in this section may not be avail-
able on all devices. Refer to Section 4.0
“Memory Organization” in this data
sheet for device-specific register and bit
information.
PIC32MX3XX/4XX
program Flash memory for executing user code. There
are three methods by which the user can program this
memory:
• Run-Time Self Programming (RTSP)
• In-Circuit Serial Programming™ (ICSP™)
• EJTAG Programming
RTSP is performed by software executing from either
Flash or RAM memory. EJTAG is performed using the
EJTAG port of the device and a EJTAG capable pro-
grammer. ICSP is performed using a serial data con-
nection to the device and allows much faster
programming times than RTSP. RTSP techniques are
described in this chapter. The ICSP and EJTAG meth-
ods are described in the “PIC32MX3XX/4XX Program-
ming
downloaded from the Microchip web site.
Specification” (DS61145),
PIC32MX3XX/4XX
devices
contain
DS61143G-page 85
which
an
may
internal
be