C8051F804-GS Silicon Laboratories Inc, C8051F804-GS Datasheet - Page 132

• Manufacturer Part Number: C8051F804-GS
• Description: IC MCU 8BIT 16KB FLASH 16SOIC
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F80xr

Specifications of C8051F804-GS

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Cap Sense, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 13
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 16-SOIC (3.9mm Width)
• Processor Series: C8051F8x
• Core: 8051
• Data Bus Width: 16 bit
• Data Ram Size: 512 B
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F800DK
• Minimum Operating Temperature: - 55 C
• On-chip Adc: 10 bit, 12 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1773-5

C8051F80x-83x
SFR Definition 22.3. OSCICN: Internal H-F Oscillator Control
SFR Address = 0xB2
132
Name
Reset
1:0
Bit
Type
7
6
5
4
3
2
Bit
SUSPEND
IFCN[1:0]
STSYNC
IOSCEN
Unused
IFRDY
IOSCEN
Name
SSE
R/W
7
1
Internal H-F Oscillator Enable Bit.
0: Internal H-F Oscillator Disabled.
1: Internal H-F Oscillator Enabled.
Internal H-F Oscillator Frequency Ready Flag.
0: Internal H-F Oscillator is not running at programmed frequency.
1: Internal H-F Oscillator is running at programmed frequency.
Internal Oscillator Suspend Enable Bit.
Setting this bit to logic 1 places the internal oscillator in SUSPEND mode. The inter-
nal oscillator resumes operation when one of the SUSPEND mode awakening
events occurs.
Suspend Timer Synchronization Bit.
This bit is used to indicate when it is safe to read and write the registers associated
with the suspend wake-up timer. If a suspend wake-up source other than Timer 2
has brought the oscillator out of suspend mode, it make take up to three timer clocks
before the timer can be read or written.
0: Timer 2 registers can be read safely.
1: Timer 2 register reads and writes should not be performed.
Spread Spectrum Enable.
Spread spectrum enable bit.
0: Spread Spectrum clock dithering disabled.
1: Spread Spectrum clock dithering enabled.
Read = 0b; Write = Don’t Care
Internal H-F Oscillator Frequency Divider Control Bits.
00: SYSCLK derived from Internal H-F Oscillator divided by 8.
01: SYSCLK derived from Internal H-F Oscillator divided by 4.
10: SYSCLK derived from Internal H-F Oscillator divided by 2.
11: SYSCLK derived from Internal H-F Oscillator divided by 1.
IFRDY
R
6
1
SUSPEND
R/W
5
0
STSYNC
Rev. 1.0
R
4
0
Function
SSE
R/W
3
0
R
2
0
1
0
IFCN[1:0]
R/W
0
0