DSPIC30F2023-30I/ML Microchip Technology, DSPIC30F2023-30I/ML Datasheet - Page 23

• Manufacturer Part Number: DSPIC30F2023-30I/ML
• Description: IC DSPIC MCU/DSP 12K 44QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F2023-30I/ML

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 12KB (4K x 24)
• Program Memory Type: FLASH
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Core Frequency: 30MHz
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 35
• Flash Memory Size: 12KB
• Supply Voltage Range: 3V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Package: 44QFN EP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 35
• Interface Type: I2C/SPI/UART
• On-chip Adc: 12-chx10-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

8.5.9
The QVER command queries the version of the
programming executive software stored in test
memory. The “version.revision” information is returned
in the response’s QE_Code using a single byte with the
following format: main version in upper nibble and
revision in the lower nibble (i.e., 0x23 means version
2.3 of programming executive software).
Expected Response (2 words):
0x1BMN (where “MN” stands for version M.N)
0x0002
9.0
9.1
The programming executive sends a response to the
programmer for each command that it receives. The
response indicates if the command was processed
correctly, and includes any required response, or error,
data.
The programming executive response set is shown in
Table
and description for each response. The response
format is described in
Format”.
TABLE 9-1:
© 2010 Microchip Technology Inc.
15
Opcode
Length
0x1
0x2
0x3
Opcode
Opcode
Field
9-1. This table contains the opcode, mnemonic
PROGRAMMING EXECUTIVE
RESPONSES
Overview
12 11
QVER COMMAND
NACK
PASS
FAIL
Mnemonic
0xB
0x1
PROGRAMMING EXECUTIVE
RESPONSE SET
Command successfully
processed.
Command unsuccessfully
processed.
Command not known.
Section 9.2 “Response
Description
Length
Description
0
9.2
All programming executive responses have a general
format consisting of a two-word header and any
required data for the command.
9.2.1
The Opcode is a 4-bit field in the first word of the
response. The Opcode indicates how the command is
processed (see
processed successfully, the response opcode is PASS.
If there is an error in processing the command, the
response opcode is FAIL, and the QE_Code indicates
the reason for the failure. If the command sent to
the programming executive is not identified, the
programming executive returns a NACK response.
9.2.2
The Last_Cmd is a 4-bit field in the first word of
the response and indicates the command that the
programming
programming
command at a time, this field is technically not required.
However, it can be used to verify that the programming
executive correctly received the command that the
programmer transmitted.
Opcode
Last_Cmd
QE_Code
Length
D_1
D_N
15
Opcode
Field
Response Format
12 11
Opcode FIELD
Last_Cmd FIELD
Last_Cmd
executive
Response opcode.
Programmer command that
generated the response.
Query code or Error code.
Response length in 16-bit words
(includes 2 header words.)
First 16-bit data word (if applicable).
Last 16-bit data word (if applicable).
executive
D_N (if applicable)
D_1 (if applicable)
Table
Length
8 7
9-1). If the command is
...
can
Description
processed.
only
QE_Code
DS70284C-page 23
process
Since
0
one
the