DSPIC30F5015-30I/PT Microchip Technology, DSPIC30F5015-30I/PT Datasheet - Page 13

• Manufacturer Part Number: DSPIC30F5015-30I/PT
• Description: IC DSPIC MCU/DSP 66K 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5015-30I/PT

• Program Memory Type: FLASH
• Program Memory Size: 66KB (22K x 24)
• Package / Case: 64-TFQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 52
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• Maximum Clock Frequency: 30 MHz
• Number Of Programmable I/os: 52
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, ICE4000, DM240002, DM330011
• Minimum Operating Temperature: - 40 C
• Package: 64TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT64PT5 - SOCKET TRAN ICE 64MQFP/TQFPAC164319 - MODULE SKT MPLAB PM3 64TQFPAC30F008 - MODULE SKT FOR DSPIC30F 64TQFPDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: DSPIC30F501530IPT

19. Module: CAN
20. Module: QEI
21. Module: QEI
© 2010 Microchip Technology Inc.
CAN Receive filters 3, 4 and 5 may not work for a
given combination of instruction cycle speed and
CAN bit time quanta.
Work around
Do not use CAN RX filters 3, 4 and 5. Instead, use
filters 0, 1 and 2.
Affected Silicon Revisions
When the TQCS and TQGATE bits in the
QEIxCON register are set, a QEI interrupt
should be generated after an input pulse on the
QEA input. This interrupt is not generated in the
affected silicon.
Work around
None.
Affected Silicon Revisions
When the TQCS and TQGATE bits in the QEIx-
CON register are set, the POSCNT counter
should not increment but erroneously does, and
if allowed to increment to match MAXCNT, a QEI
interrupt will be generated.
Work around
To prevent the erroneous increment of POSCNT
while running the QEI in Timer Gated Accumulation
mode, initialize MAXCNT = 0.
Affected Silicon Revisions
A0
A0
A0
X
X
X
22. Module: ADC
If the ADC module is in an enabled state when the
device enters Sleep mode as a result of executing
a PWRSAV #0 instruction, the device power-down
current (I
in the device data sheet. This may happen even if
the ADC module is disabled by clearing the ADON
bit prior to entering Sleep mode.
Work around
In order to remain within the I
listed in the device data sheet, the user software
must completely disable the ADC module by
setting the ADC Module Disable bit in the
corresponding
(PMDx) register, prior to executing a PWRSAV
#0 instruction.
Affected Silicon Revisions
A0
X
dsPIC30F5015/5016
PD
) may exceed the specifications listed
Peripheral
Module
PD
DS80452C-page 13
specifications
Disable