LPC3180FEL320,551 NXP Semiconductors, LPC3180FEL320,551 Datasheet - Page 27

• Manufacturer Part Number: LPC3180FEL320,551
• Description: IC ARM9 MCU 208MHZ 320-LFBGA
• Manufacturer: NXP Semiconductors
• Series: LPC3000r

Specifications of LPC3180FEL320,551

• Program Memory Type: ROMless
• Package / Case: 320-LFBGA
• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 208MHz
• Connectivity: EBI/EMI, I²C, MMC, SPI, UART/USART, USB OTG
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 55
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.1 V ~ 3.3 V
• Data Converters: A/D 3x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Processor Series: LPC31
• Core: ARM926EJ-S
• Data Bus Width: 16 bit, 32 bit
• Data Ram Size: 64 KB
• Interface Type: I2C/SPI/UART/USB
• Maximum Clock Frequency: 208 MHz
• Number Of Programmable I/os: 55
• Number Of Timers: 2
• Operating Supply Voltage: 3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: MDK-ARM, RL-ARM, ULINK2, LPC3180-DEV-KIT
• Development Tools By Supplier: OM10096
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 3-ch x 10-bit
• Package: 320LFBGA
• Device Core: ARM926EJ-S
• Family Name: LPC3100
• Maximum Speed: 208 MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 622-1018 - EVAL KIT FOR LP3180568-4063 - KIT DEV LPC3180568-4062 - DEBUGGER J-LINK JTAG568-4061 - DEBUGGER U-LINK2 JTAG FOR NXP
• Eeprom Size: -
• Program Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 935281874551; LPC3180FEL320-S; LPC3180FEL320-S

NXP Semiconductors
LPC3180_2
Preliminary data sheet
6.25.2 Embedded trace buffer
The ARM core has a Debug Communication Channel function built-in. The debug
communication channel allows a program running on the target to communicate with the
host debugger or another separate host without stopping the program flow or entering the
debug state.
The Embedded Trace Module (ETM) is connected directly to the ARM core. It compresses
the trace information and exports it through a narrow trace port. An internal Embedded
Trace Buffer of 2 k
control. Data from the Embedded Trace Buffer is recovered by the debug software through
the JTAG port.
The trace contains information about when the ARM core switches between states.
Instruction trace (or PC trace) shows the flow of execution of the processor and provides a
list of all the instructions that were executed. Instruction trace is significantly compressed
by only broadcasting branch addresses as well as a set of status signals that indicate the
pipeline status on a cycle by cycle basis. For data accesses either data or address or both
can be traced.
24 bits captures the trace information under software debugger
Rev. 02 — 15 February 2007
16/32-bit ARM microcontroller with external memory interface
LPC3180
© NXP B.V. 2007. All rights reserved.
27 of 36